[HTML][HTML] Failure of the ASTM E 1921 master curve to characterize the fracture toughness temperature dependence of ferritic steel and successful application of the …
T Meshii - Theoretical and Applied Fracture Mechanics, 2019 - Elsevier
The fracture toughness KJ c of a material in the ductile-to-brittle transition temperature
(DBTT) region shows a large temperature dependence, large scatter, and specimen …
(DBTT) region shows a large temperature dependence, large scatter, and specimen …
Applicability of modified Ritchie-Knott-Rice failure criterion to predict the onset of cleavage fracture for the test specimen with residual stress introduced to the crack tip
K Ishihara, T Hamada, N Kikuya, T Meshii - Procedia Structural Integrity, 2016 - Elsevier
In this work, applicability of the modified Ritchie-Knott-Rice (RKR) failure criterion (which
predicts the onset of cleavage fracture when the crack opening stress measured at four …
predicts the onset of cleavage fracture when the crack opening stress measured at four …
An Improved Method for Calibration of Beremin Model Parameters
J Pan, Y Wang, Q Wu - Mechanics of Solids, 2023 - Springer
The effectiveness of the improved Ritchie-Knott-Rice failure criterion ((4δ t, σ22c) local
fractures criterion) for converting the minimum fracture toughness value of different …
fractures criterion) for converting the minimum fracture toughness value of different …
FEASIBILITY OF THE CRITERION TO PREDICT FRACTURE TOUGHNESS OF FERRITIC STEEL USING SPECIFIED SPECIMEN TYPES
J Pan, Y Wang - Journal of Applied Mechanics and Technical Physics, 2022 - Springer
Abstract An improved Ritchie–Knott–Rice failure criterion, namely criterion, for the A515-70
steel is studied with allowance for the specimen geometry, specimen temperature, and initial …
steel is studied with allowance for the specimen geometry, specimen temperature, and initial …
Учредители: Институт гидродинамики им. МА Лаврентьева СО РАН, Сибирское отделение РАН
МИТФ ПРИКЛАДНАЯ - ПРИКЛАДНАЯ МЕХАНИКА И ТЕХНИЧЕСКАЯ …, 2022 - elibrary.ru
С использованием SST-(k-ω)-модели турбулентности выполнен численный анализ
параметров турбулентного пограничного слоя и исследована возможность …
параметров турбулентного пограничного слоя и исследована возможность …
Application of the T-Scaling Method to Predict Fracture Toughness Under Compressive Residual Stress in the Transition Temperature Region
T Meshii, K Ishihara - Pressure Vessels and Piping …, 2018 - asmedigitalcollection.asme.org
The fracture toughness J c of a material in the ductile-to-brittle transition temperature region
shows a test specimen thickness (TST) effect and temperature dependence, and apparently …
shows a test specimen thickness (TST) effect and temperature dependence, and apparently …
Fracture Toughness Prediction under Compressive Residual Stress by Using a Stress-Distribution T-Scaling Method
T Meshii, K Ishihara - Metals, 2017 - mdpi.com
The improvement in the fracture toughness J c of a material in the ductile-to-brittle transition
temperature region due to compressive residual stress (CRS) was considered in this study …
temperature region due to compressive residual stress (CRS) was considered in this study …
Application of T-Scaling Method to Account for the Effects of Notch Acuity on Notch Fracture Toughness in the Ductile-to-Brittle Transition Temperature Region
H Nakano, T Meshii - Pressure Vessels and Piping …, 2018 - asmedigitalcollection.asme.org
Current defect assessment procedures based on fracture mechanics usually assume flaws
to be infinitely sharp. While this assumption may be appropriate for fatigue cracks, for non …
to be infinitely sharp. While this assumption may be appropriate for fatigue cracks, for non …
[PDF][PDF] Applicability of Modified Ritchie-Knott-Rice Failure Criterion to Predict the Occurrence of Cleavage Fracture under Residual Stress Field
K Ishihara, T Hamada, T Meshii - researchgate.net
This paper introduces our experience of applying the modified Ritchie-Knott-Rice (RKR)
failure criterion (which predicts the occurrence of cleavage fracture when the mid-plane …
failure criterion (which predicts the occurrence of cleavage fracture when the mid-plane …
Applicability of a Deterministic Approach to Predict the Minimum Fracture Toughness in the DBTT Region From Tensile Test Results: Example for 0.5 T SE (B) and …
T Meshii, Y Fujita, T Yamaguchi - Pressure Vessels …, 2016 - asmedigitalcollection.asme.org
Fracture toughness J c of the material in ductile to brittle transition temperature region is
known to have two specimen size effects; the planar size effect and the test specimen …
known to have two specimen size effects; the planar size effect and the test specimen …