Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs–a review
Composites are, in general, a rapidly evolving and growing technical field with a very wide
range of applications across the aerospace, defence, energy, medical and transport sectors …
range of applications across the aerospace, defence, energy, medical and transport sectors …
Effects of carbon additives on the properties of ZrB2–based composites: a review
This review presents the recent achievements on carbon additives incorporated in ZrB 2
ceramics, improved properties, and their advancements. Monolithic ZrB 2 ceramics have …
ceramics, improved properties, and their advancements. Monolithic ZrB 2 ceramics have …
Promising ultra-high-temperature ceramic materials for aerospace applications
EP Simonenko, DV Sevast'Yanov… - Russian journal of …, 2013 - Springer
Some aspects of heat transfer upon the interaction between components with a sharp
leading edge and high-enthalpy high-speed flow of dissociated air have been considered; …
leading edge and high-enthalpy high-speed flow of dissociated air have been considered; …
Microstructural, thermal and mechanical characterization of TiB2–SiC composites doped with short carbon fibers
Spark plasma sintering method, at the temperature of 1800° C under the pressure of 40 MPa
for 7 min, was employed for fabrication of TiB 2–SiC-based composites. The influences of …
for 7 min, was employed for fabrication of TiB 2–SiC-based composites. The influences of …
Characterization of hot-pressed graphene reinforced ZrB2–SiC composite
MS Asl, MG Kakroudi - Materials Science and Engineering: A, 2015 - Elsevier
In this paper, the hot pressing of monolithic ZrB 2 ceramic (Z), ZrB 2–25 vol% SiC composite
(ZS), as well as 5 wt% graphene reinforced ZrB 2–25 vol% SiC composite (ZSG) is …
(ZS), as well as 5 wt% graphene reinforced ZrB 2–25 vol% SiC composite (ZSG) is …
Ablation behavior of (Zr, Ta) B2-SiC coating on carbon/carbon composites at 2300° C
K Tong, M Zhang, Z Su, X Wu, C Zeng, X Xie, C Fang… - Corrosion …, 2021 - Elsevier
Abstract Zr-Ta-B-SiC multiphase coating was prepared on carbon/carbon composites by
pack cementation and slurry method. The (Zr, Ta) B 2 solid solution was found to be the key …
pack cementation and slurry method. The (Zr, Ta) B 2 solid solution was found to be the key …
Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure
MS Asl, MG Kakroudi, S Noori - Journal of Alloys and Compounds, 2015 - Elsevier
Abstract ZrB 2-based composites, containing 15, 20, 25, and 30 vol% SiC, have been
prepared by hot pressing at temperatures of 1700, 1850 and 2000° C for 30 min under a …
prepared by hot pressing at temperatures of 1700, 1850 and 2000° C for 30 min under a …
A novel ZrB2–C3N4 composite with improved mechanical properties
In this research, a novel application for graphitic carbon nitride as the sintering aid and
reinforcement was investigated. In this regard, gC 3 N 4 doped ZrB 2-based ultrahigh …
reinforcement was investigated. In this regard, gC 3 N 4 doped ZrB 2-based ultrahigh …
Influence of silicon carbide addition on the microstructural development of hot pressed zirconium and titanium diborides
The influences of adding SiC on the microstructure and densification behavior of ZrB 2 and
TiB 2 ceramics, hot pressed at 1850° C for 60 min under 20 MPa, were investigated. The …
TiB 2 ceramics, hot pressed at 1850° C for 60 min under 20 MPa, were investigated. The …
Effect of carbon nanotube on processing, microstructural, mechanical and ablation behavior of ZrB2-20SiC based ultra-high temperature ceramic composites
A Nisar, S Ariharan, T Venkateswaran, N Sreenivas… - Carbon, 2017 - Elsevier
Abstract Herein, zirconium diboride (ZrB 2) is reinforced with silicon carbide (SiC) and
carbon nanotube (CNT) to provide enhanced structural stability and oxidation protection …
carbon nanotube (CNT) to provide enhanced structural stability and oxidation protection …