This paper presents results from testing eight full-scale walls made of calcium silicate units.
Tested walls were reinforced in the bed joint or unreinforced, with or without openings. The …

The identification of parameters of Menétrey-Willamsurface made of concrete, masonry or
autoclaved aerated concrete is not complicated. It is much more difficult to identify failure …

The article presents the author's proposal to determine the parameters of the Mentérey–
Willam (MW-3) plasticity surface of the homogeneous masonry elements made of …

In dem vorliegenden Beitrag wurden Ergebnisse der Prüfungen von großformatigen
Wandmodellen mit zwei Fensteröffnungen dargestellt. Wände aus Porenbeton und …

This paper discusses the failure of a warehouse floor (with an approximate surface area of
1.550 m 2) inside an industrial building with a total developed area of approx. 8.200 m 2 …

The study investigated both the static and dynamic behavior of silicate materials through a
series of experimental and numerical tests. Compression tests were conducted on cubic …

This article presents results of tests on full‐scale wall models with two window openings.
Tested walls were made of autoclaved aerated concrete (AAC) units and calcium‐silicate (C …

The work describes the damage, testing and method of repairing the flooring. The flooring
formed part of a commercial pavilion covering an area of approx. 1200 m 2. Significant …

In the article are presented the results of the shear and flexural strength of the masonry
specimens with the thin joints made of 15 types of the calcium-silicate masonry units …

W numerycznych analizach konstrukcji murowych stosować można zróżnicowaną metodykę
postępowania. W zastosowaniach inżynierskich, które dopuszczają aktualne normy …