Selective catalytic reduction with NH3 (NH3–SCR) is the most efficient technology to reduce
the emission of nitrogen oxides (NO x) from coal-fired industries, diesel engines, etc …

To address the multiple air pollution problems, the simultaneous abatement of NO x and
VOCs in the existing NH 3-SCR units has attracted considerable environmental attention …

As primary air pollutants, nitrogen oxides (NO x) result in a series of environmental issues,
such as photochemical smog, acid rain, ozone depletion, and fine particle pollution, which …

Sulfur poisoning is a common problem causing catalyst deactivation during the industrial
catalytic process. However, for selective catalytic reduction of NO x with ammonia (NH3 …

Currently, SO2-induced catalyst deactivation from the sulfation of active sites turns to be an
intractable issue for selective catalytic reduction (SCR) of NO x with NH3 at low …

In this study, the poisoning effects of SO2 on the V2O5–WO3/TiO2 (1% VWTi) and CeO2–
WO3/TiO2 (5% CeWTi) selective catalytic reduction (SCR) catalysts were investigated in the …

Selective catalytic reduction of NO with NH3 (NH3-SCR) is a powerful technique for the
abatement of NOx from stationary sources, and the currently used VOx/TiO2-based catalysts …

Abstract Cerium modified La–Mn oxides for NH 3–SCR at low temperature is prepared by
one–step synthesis method and characterized. The results showed that the perovskite La …

Thermally stable CeO 2 cubes and nanospheres were synthesized and modified by sulfation
treatment. Non-sulfated CeO 2 cubes and nanospheres did not exhibit good catalytic …

The effect of oxygen vacancies on ceria catalyst for selective catalytic reduction with NH 3
(NH 3-SCR) of NO was investigated. The characterizations indicated that CeO 2-Ar catalyst …