[HTML][HTML] A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties
Various biomedical implants for prolonged usage in the human body have been created in
recent years in a massive and steadily increasing number. Friction stir techniques are solid …
recent years in a massive and steadily increasing number. Friction stir techniques are solid …
[HTML][HTML] Recent research progress in friction stir welding of aluminium and copper dissimilar joint: a review
Aluminium and copper are employed in various industrial applications due to their high
plasticity, thermal conductivity, electrical conductivity and characteristics. By effectively …
plasticity, thermal conductivity, electrical conductivity and characteristics. By effectively …
[HTML][HTML] The influence of reinforcement particles friction stir processing on microstructure, mechanical properties, tribological and corrosion behaviors: a review
Nowadays friction stir processing (FSP) has been used as a surface modification
technology. The FSP improves the surface properties of the material by intense plastic …
technology. The FSP improves the surface properties of the material by intense plastic …
Modeling, optimization and performance evaluation of tic/graphite reinforced al 7075 hybrid composites using response surface methodology
The tenacious thirst for fuel-saving and desirable physical and mechanical properties of the
materials have compelled researchers to focus on a new generation of aluminum hybrid …
materials have compelled researchers to focus on a new generation of aluminum hybrid …
Friction stir alloying of AZ61 and mild steel with Al-CNT additive
The friction stir alloying (FSA) procedure successfully produced dissimilar joints between
AZ61 magnesium alloy and mild steel with Al-CNT additions. Before welding, Al-CNT …
AZ61 magnesium alloy and mild steel with Al-CNT additions. Before welding, Al-CNT …
Tribological and corrosion behaviour of Al-Mg-CeO2 metal matrix surface composites
In this work, multiple-passes of friction stir processing (FSP) technique was utilized to
fabricate Al-Mg-CeO 2 surface composites (SCs). Microstructural studies revealed that 5 …
fabricate Al-Mg-CeO 2 surface composites (SCs). Microstructural studies revealed that 5 …
[HTML][HTML] Friction stir alloying of AZ61 and mild steel with Cu-CNT additive
MA bin Ariffin, MR bin Muhamad, S Raja… - Journal of Materials …, 2022 - Elsevier
Dissimilar joining between lightweight magnesium (Mg) alloys and steel is essential to
produce lighter vehicles, improve vehicles' fuel efficiency, and reduce carbon emissions …
produce lighter vehicles, improve vehicles' fuel efficiency, and reduce carbon emissions …
Metallurgical and mechanical study of the effect of FSW parameters on dissimilar joining of St37 and AZ31
In order to reduce the final weight of the car and optimize fuel consumption, it is necessary to
join light alloys such as magnesium with steel, which is an important material of the car …
join light alloys such as magnesium with steel, which is an important material of the car …
[HTML][HTML] Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder …
The primary issue with joining an immiscible magnesium/iron system is the lack of a bonding
medium. This research used an aluminium (Al) additive as a bonding medium to facilitate …
medium. This research used an aluminium (Al) additive as a bonding medium to facilitate …
Microstructure-based modeling of friction stir welded joint of dissimilar metals using crystal plasticity
The friction stir welding (FSW) process shows promising results in joining dissimilar metals
which are otherwise almost impossible to join using traditional welding techniques. Being a …
which are otherwise almost impossible to join using traditional welding techniques. Being a …