A review on manufacturability of magnesium matrix composites: Processing, tribology, joining, and machining
The effort to use magnesium-based materials is gradually increasing in various structural
applications of automobile and aerospace industries because of their lower specific weight …
applications of automobile and aerospace industries because of their lower specific weight …
Application of metal matrix composite fabricated by reinforcement materials–A review
Abstract Metal Matrix Composites (MMCs) are recently developed fabricated materials with
characteristics like reduced thermal expansion coefficient, enhanced specific strength …
characteristics like reduced thermal expansion coefficient, enhanced specific strength …
Effect of varying TiB2 reinforcement and its ageing behaviour on tensile and hardness properties of in-situ Al-4.5% Cu-xTiB2 composite
The objective of this study is to understand the suitability of mixed salt route using stir casting
technique to fabricate in-situ Al-4.5% Cu-xTiB 2 (x= 3, 6, 9 and 12 wt%) composites. The …
technique to fabricate in-situ Al-4.5% Cu-xTiB 2 (x= 3, 6, 9 and 12 wt%) composites. The …
Experimental investigations on microstructure, mechanical behavior and tribological analysis of AA5154/SiC composites by stir casting
Aluminum metal matrix composites (MMCs) exhibit promising mechanical properties that are
potential materials for the aeronautical and automotive industries. In this study, aluminum …
potential materials for the aeronautical and automotive industries. In this study, aluminum …
[HTML][HTML] Study on effect of TiB2 reinforcement on the microstructural and mechanical properties of magnesium RZ5 alloy based metal matrix composites
A self-propagating high-temperature synthesis route is adopted for the fabrication of TiB 2-
reinforced magnesium RZ5 alloy-based in-situ metal matrix composites. Ti-B is used …
reinforced magnesium RZ5 alloy-based in-situ metal matrix composites. Ti-B is used …
Thermal history analysis and structure-property validation of friction stir welded Al-7079-TiC in-situ metal matrix composites
In the present study, Friction stir welding (FSW) of 6.5 mm thick cast Al-7079-TiC in-situ
composite was obtained at 708, 931, 1216 rpm and 40 mm/min respectively. Microstructural …
composite was obtained at 708, 931, 1216 rpm and 40 mm/min respectively. Microstructural …
Mechanical response of friction stir butt weld Al-4.5% Cu/TiB2/2.5 p in situ composite: Statistical modelling and optimization
The current investigation discusses the effectiveness of stir casting technique using the
mixed salt route and friction stir butt welding (FSW) process for fabrication and joining of in …
mixed salt route and friction stir butt welding (FSW) process for fabrication and joining of in …
Investigation on the thermodynamic stability of phases evolved in Al-based hybrid metal matrix composite fabricated using in-situ stir casting route
The objective of this study is to investigate the thermodynamic stability of different phases
evolved during fabrication of Al-12wt% Si-(TiB 2+ Al 2 O 3) hybrid composite using in-situ stir …
evolved during fabrication of Al-12wt% Si-(TiB 2+ Al 2 O 3) hybrid composite using in-situ stir …
Surface Integrity and Flank Wear Response Under Pure Coconut Oil-Al2O3 Nano Minimum Quantity Lubrication Turning of Al-7079/7 wt%-TiC In Situ Metal Matrix …
Major cooling and lubricating properties such as conduction, convection, and lubricant
stability at higher temperatures are improvised by the addition of nanoparticle into metal …
stability at higher temperatures are improvised by the addition of nanoparticle into metal …
Studies on Al6061nanohybrid Composites Reinforced with SiO2/3x% of TiC -a Agro-Waste
A ChinnamahammadBhasha, K Balamurugan - Silicon, 2022 - Springer
Abstract Titanium Carbidenanoparticles (TiCnp) and Risk Husk Ash (RHAnp) as
reinforcement's in the aluminum matrix, a hybrid composite was prepared through the ex-situ …
reinforcement's in the aluminum matrix, a hybrid composite was prepared through the ex-situ …