Microstructure evolution and mechanical properties of friction stir spot welded dissimilar aluminum-copper joint
L Zhou, GH Li, RX Zhang, WL Zhou, WX He… - Journal of Alloys and …, 2019 - Elsevier
Dissimilar lap joints of 1060 aluminum and T2 copper were obtained by friction stir spot
welding (FSSW) at various rotational speeds. The measured process variables during …
welding (FSSW) at various rotational speeds. The measured process variables during …
Effect of microwave sintering on the microstructure and mechanical properties of AA7075/B4C/ZrC hybrid nano composite fabricated by powder metallurgy techniques
Abstract AA7075+ 6% B4C+ 3% ZrC nano hybrid composite was successfully fabricated,
with nano reinforcements composition in AA7075 alloy selected based on previous …
with nano reinforcements composition in AA7075 alloy selected based on previous …
Fabrication and characterization of 2024 aluminium–High entropy alloy composites
Work has been carried out to produce composites with high strength and good ductility by
maximizing a uniform and smooth interface for effective transfer of load and minimizing …
maximizing a uniform and smooth interface for effective transfer of load and minimizing …
[HTML][HTML] Mechanical properties of Aluminum-Copper (p) composite metallic materials
S Madhusudan, MMM Sarcar… - Journal of applied research …, 2016 - scielo.org.mx
Composite metallic materials (CMMs) are prepared by dispersing copper particulates in
aluminum matrix using stir-cast technique. Their behavior is compared with the alloy having …
aluminum matrix using stir-cast technique. Their behavior is compared with the alloy having …
The influence of porosity and precipitates on the corrosion behavior of A356 aluminum alloy
H Zhang, S Yu, Z Yang, C Zhang - Journal of Electroanalytical Chemistry, 2023 - Elsevier
In this article, the pore and precipitation phases of A356 aluminum alloy were regulated by
adding element Cu, and the corrosion kinetic behavior was investigated by electrochemical …
adding element Cu, and the corrosion kinetic behavior was investigated by electrochemical …
Microstructure and mechanical properties characterization of architectured copper aluminum composites manufactured by cold-drawing
The present study investigates the mechanical behavior of severely plastic-deformed Cu-Al
composite wires with different diameters and heat-treatments. Each composite holds 61 …
composite wires with different diameters and heat-treatments. Each composite holds 61 …
Effect of spark plasma sintering on microstructure and mechanical properties of AA7075/B4C/ZrC hybrid nanocomposite fabricated by powder metallurgy techniques
In the present work, AA7075/B 4 C/ZrC hybrid nanocomposite has been fabricated by spark
plasma sintering (SPS) process at a temperature of 500° C with a heating rate of 50° C/min …
plasma sintering (SPS) process at a temperature of 500° C with a heating rate of 50° C/min …
Influence of intermetallic compounds on the electrical resistivity of architectured copper clad aluminum composites elaborated by a restacking drawing method
Architectured wires containing 61 restacked Copper Clad Aluminum (CCA) wires were cold-
drawn down to a diameter of 1 mm without intermediate annealing. Samples were taken at …
drawn down to a diameter of 1 mm without intermediate annealing. Samples were taken at …
Metal-metal composites-an innovative way for multiple strengthening
Metal-metal composites were designed and fabricated to overcome the limitations with metal-
ceramic composites. These systems composed of two different metals having good solubility …
ceramic composites. These systems composed of two different metals having good solubility …
Aluminium Matrix Composites: B2 Aluminide Strengthening
The influence of the B2 aluminide particulate reinforcement (up to 5 wt%) on the mechanical
properties of pure aluminium is investigated for the first time. Aluminium metal matrix …
properties of pure aluminium is investigated for the first time. Aluminium metal matrix …