[HTML][HTML] Comparative evaluation of thermal and mechanical properties of nickel alloy 718 prepared using selective laser melting, spark plasma sintering, and casting …
AS Hakeem, F Patel, N Minhas, A Malkawi… - Journal of Materials …, 2021 - Elsevier
In this study, three different methods, namely, selective laser melting (SLM), spark plasma
sintering (SPS), and casting techniques, were utilized to fabricate nickel alloy 718 samples …
sintering (SPS), and casting techniques, were utilized to fabricate nickel alloy 718 samples …
Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625
In this study, the influence of solutionizing and aging treatments on the microstructure and
mechanical properties of alloy 625 superalloy samples produced by powder bed binder jet …
mechanical properties of alloy 625 superalloy samples produced by powder bed binder jet …
Grain boundary serration in nickel alloy inconel 600: Quantification and mechanisms
The serration of grain boundaries in Inconel 600 caused by heat treatment is studied
systematically. A new method based on Fourier transforms is used to analyse the multiple …
systematically. A new method based on Fourier transforms is used to analyse the multiple …
Thermal stability and thermal expansion behavior of FeCoCrNi2Al high entropy alloy
Present work reports the thermal stability and thermal expansion behavior of dual-phase
FeCoCrNi 2 Al HEA prepared by Mechanical Activated Synthesis and consolidated by hot …
FeCoCrNi 2 Al HEA prepared by Mechanical Activated Synthesis and consolidated by hot …
High temperature sliding wear behavior of detonation sprayed Ni-5wt% Al coating
The tribological behavior of detonation (DSC) sprayed Ni-5% wtAl coatings at room
temperature (25° C) and elevated temperature (850° C) has been studied in this work. Dry …
temperature (25° C) and elevated temperature (850° C) has been studied in this work. Dry …
Evaluation of electrochemical boriding of Inconel 600
Inconel 600 and other nickel-based superalloys are used extensively for a variety of
industrial applications involving high temperatures and aggressive environments. They are …
industrial applications involving high temperatures and aggressive environments. They are …
Comprehensive experimental analysis of igneous ultra-mafic rocks as thermal energy storage materials
Natural rocks have aroused great interest as available, cost-effective and eco-friendly
materials for energy storage, mainly as filler materials in packed-bed systems. In this light …
materials for energy storage, mainly as filler materials in packed-bed systems. In this light …
[HTML][HTML] Microstructural, thermomechanical and tribological behavior of refractory high-entropy AlxCr0. 25Nb0. 5Ta0. 5Ti1. 5 (x= 0.5, 1) alloys
AS Hakeem, AY Adesina, AS Mohammed… - Journal of Materials …, 2023 - Elsevier
Refractory high-entropy alloys (RHEAs) with varying Al composition Al x Cr 0.25 Nb 0.5 Ta
0.5 Ti 1.5 (x= 0.5, 1) possessing a single body-centered cubic phase were prepared by arc …
0.5 Ti 1.5 (x= 0.5, 1) possessing a single body-centered cubic phase were prepared by arc …
In situ high-temperature X-ray diffraction study on atmospheric plasma and detonation sprayed Ni-5 wt.% Al coatings
In situ high-temperature x-ray diffraction (HT-XRD) was used in the present study to assess
the coefficient of thermal expansion and recrystallization of Ni-5 wt.% Al coatings …
the coefficient of thermal expansion and recrystallization of Ni-5 wt.% Al coatings …
Key influencing factors for the thermal shock resistance of La2Zr2O7-based multilayer TBCs
K Bobzin, L Zhao, W Wietheger, T Königstein - Surface and Coatings …, 2020 - Elsevier
In this study, different multilayer thermal barrier coatings (TBCs) made from La 2 Zr 2 O 7
(LZ), ZrO 2-7 wt% Y 2 O 3 (YSZ) and a freestanding LZ-YSZ coat were designed and …
(LZ), ZrO 2-7 wt% Y 2 O 3 (YSZ) and a freestanding LZ-YSZ coat were designed and …