A review of magnesium corrosion in bio-applications: mechanism, classification, modeling, in-vitro, and in-vivo experimental testing, and tailoring Mg corrosion rate
S Zhao, M Tayyebi, M Yarigarravesh, G Hu - Journal of Materials Science, 2023 - Springer
Materials with medical applications must show different properties and requirements, such
as mimicking bones' structures and supporting bone tissue formation (osteogenesis) for …
as mimicking bones' structures and supporting bone tissue formation (osteogenesis) for …
[HTML][HTML] The effect of multi-pass friction stir processing on microstructure, mechanical properties, and corrosion behavior of WE43-nHA bio-composite
The influence of multiple passes during friction stir processing (FSP) on the evolution of
microstructure, hardness, compressive strength, and corrosion behavior of a Mg-based bio …
microstructure, hardness, compressive strength, and corrosion behavior of a Mg-based bio …
[HTML][HTML] Assessment of microstructure, biocompatibility and in-vitro biodegradation of a biomedical Mg-Hydroxyapatite composite for bone tissue engineering
In the present study, an Mg-based biomedical composite is fabricated by addition of
Hydroxyapatite bioactive nanoparticles into a substrate of bioabsorbable WE43 Mg alloy …
Hydroxyapatite bioactive nanoparticles into a substrate of bioabsorbable WE43 Mg alloy …
[HTML][HTML] Fabrication of osteogenesis induced WE43 Mg-Hydroxyapatite composites with low biodegradability and increased biocompatibility for orthopedic implant …
M Mehdizade, AR Eivani, O Esmaielzadeh… - Journal of Materials …, 2023 - Elsevier
Good biocompatibility, low biodegradation rate and excellent mechanical properties are
essential for desirable performance of metallic biomaterials during osseointegration …
essential for desirable performance of metallic biomaterials during osseointegration …
Grain refinement and improved mechanical properties of Mg-4Zn-0.5 Ca-0.5 RE magnesium alloy by thermomechanical processing
M Maleki, S Berndorf, S Mohammadzehi… - Journal of Alloys and …, 2023 - Elsevier
Abstract The high strength Mg-4Zn-0.5 Ca-0.5 RE magnesium alloy was subjected to
different hot deformation processes of extrusion, forging, and their combination for grain …
different hot deformation processes of extrusion, forging, and their combination for grain …
Tribo-corrosive wear and mechanical properties of nanoparticles reinforced Mg-AZ91D composites
A Gnanavelbabu, E Vinothkumar, NS Ross… - Tribology …, 2023 - Elsevier
This study investigates the corrosion behaviour of magnesium (Mg-AZ91D) alloy reinforced
with nano metal oxides (ZnO, MnO, and TiO 2) using the tribocorrosion methodology. The …
with nano metal oxides (ZnO, MnO, and TiO 2) using the tribocorrosion methodology. The …
Mechanical and corrosion properties of hydrogen-free DLC coatings prepared on degradable as-extruded WE43 alloy using FCVA technology
L Ren, X Liu, H Cao, Y Tang, F Qi, N Zhao, Y Dai… - Surface and Coatings …, 2024 - Elsevier
Magnesium alloys have great potential for medical applications. However, their rapid
degradation has limited their development. Hydrogen-free DLC coatings were deposited on …
degradation has limited their development. Hydrogen-free DLC coatings were deposited on …
Microstructural basis for improved corrosion resistance and mechanical properties of fabricated ultra-fine grained Mg-Akermanite composites
M Mehdizade, AR Eivani, F Tabatabaei… - Materials Chemistry and …, 2022 - Elsevier
In the present research, a composite with a magnesium alloy (WE43) as the matrix and
Akermanite as the bioactive and reinforcing agent was fabricated by friction stir processing …
Akermanite as the bioactive and reinforcing agent was fabricated by friction stir processing …
The effect of heat treatment on the microstructure and electrochemical corrosion behavior of multilayer AA6061 alloy fabricated by additive friction stir deposition
L Chen, L Zhu, L Lu, Z Yang, X Ren, X Zhang - Applied Surface Science, 2024 - Elsevier
Multilayer AA6061 aluminum alloy components were successfully fabricated by additive
friction stir deposition (AFSD). The effect of heat treatment on the microstructure and …
friction stir deposition (AFSD). The effect of heat treatment on the microstructure and …
The effect of permanent magnet stirring on the corrosion resistance of Sn-2.0 Ag-0.5 Cu-2Zn solder alloys in NaCl solution
M Ragab, MA Bedair - Materials Chemistry and Physics, 2023 - Elsevier
Permanent magnet stirring (PMS) is adjusted to increase the alloy corrosion resistance by
modifying the crystallographic texture. According to the findings, the lamellar structure had …
modifying the crystallographic texture. According to the findings, the lamellar structure had …