Role of ferrite nanoparticles in hyperthermia applications
G Nandhini, MK Shobana - Journal of Magnetism and Magnetic Materials, 2022 - Elsevier
Nanoferrites are comprehensively employed as leading thermoseeds in biomedical
applications remarkably in magnetic hyperthermia treatments owing to their biocompatibility …
applications remarkably in magnetic hyperthermia treatments owing to their biocompatibility …
Synthesis, physical properties, and biomedical applications of magnetic nanoparticles: a review
Recent innovations in nanotechnology have opened the applicability of multifunctional
nanoparticles (NPs) in biomedical diagnosis and treatment. The examples of NPs which …
nanoparticles (NPs) in biomedical diagnosis and treatment. The examples of NPs which …
[HTML][HTML] Influence of the modifiers in polyol method on magnetically induced hyperthermia and biocompatibility of ultrafine magnetite nanoparticles
A Radoń, A Włodarczyk, Ł Sieroń… - Scientific Reports, 2023 - nature.com
Abstract Magnetite nanoparticles (Fe3O4 NPs) are widely tested in various biomedical
applications, including magnetically induced hyperthermia. In this study, the influence of the …
applications, including magnetically induced hyperthermia. In this study, the influence of the …
Investigation studies of structural, electrical, dielectric, and optical of DyTi0.5 Mn0.5O3 multiferroic for optoelectronics applications
G Raddaoui, O Rejaiba, M Nasri, K Khirouni… - Journal of Materials …, 2022 - Springer
In the present communication, the Ti-doped DyMnO3, ie, DyTi0. 5Mn0. 5O3 (DTMO)
perovskite has been synthesized by the conventional solid-state reaction technique, and …
perovskite has been synthesized by the conventional solid-state reaction technique, and …
[HTML][HTML] Magnetic hyperthermia in the 400–1,100 kHz frequency range using MIONs of condensed colloidal nanocrystal clusters
D Kouzoudis, G Samourgkanidis… - Frontiers in …, 2021 - frontiersin.org
In the current study, we explored the magnetic hyperthermia performance of condensed–
clustered magnetic iron oxide nanoparticles (MIONs) in the range of 400 kHz to 1.1 MHz at …
clustered magnetic iron oxide nanoparticles (MIONs) in the range of 400 kHz to 1.1 MHz at …
Complex impedance spectroscopy, dielectric response, and magnetic properties of the La0. 7 Sr0. 3BO3 (B= Mn, Fe, Co, or Ni) perovskite oxides
M Khosrozadeh, K Mabhouti, P Norouzzadeh… - Ceramics …, 2024 - Elsevier
Abstract The perovskite materials (La 0.7 Sr 0.3 BO 3, B= Ni, Co, Fe, or Mn), in the present
study, have successfully been prepared, using the co-precipitation method. X-ray diffraction …
study, have successfully been prepared, using the co-precipitation method. X-ray diffraction …
Investigation of charge-carriers dynamics and sub/super-linear response for La0. 8Na0. 2-x□ xMnO3 (x= 0 and 0.1) perovskite ceramics
W Hizi, H Rahmouni, K Khirouni, E Dhahri - Physica B: Condensed Matter, 2024 - Elsevier
Abstract La 0.8 Na 0.2-x□ x MnO 3 (x= 0 and 0.1) compounds were prepared by solid-state
reaction. XRD patterns were used to check the structural properties. Experimental results …
reaction. XRD patterns were used to check the structural properties. Experimental results …
Enhanced photocatalytic degradation of tetracycline over magnetic La0. 7Sr0. 3MnO3/g-C3N4 p–n heterojunction arising from the synergistic effects of oxygen …
W Zhai, J He, S Hu, Y Liang, F Chen, Y Wang… - Journal of Alloys and …, 2022 - Elsevier
A novel, magnetic, p–n heterojunction-structured La 0.7 Sr 0.3 MnO 3/gC 3 N 4 (LS/CN)
photocatalyst was designed by hybridizing p-type La 0.7 Sr 0.3 MnO 3 with n-type gC 3 N 4 …
photocatalyst was designed by hybridizing p-type La 0.7 Sr 0.3 MnO 3 with n-type gC 3 N 4 …
Nanoparticles size effect on transport properties of doped manganite elaborated by sol–gel route
W Hizi, H Rahmouni, K Khirouni, E Dhahri - Journal of Materials Science …, 2023 - Springer
In the present work, Sr-doped lanthanum manganite is successfully synthesized using sol–
gel route. Obtained compounds are annealed at 600 and 800° C in the aim to modify the …
gel route. Obtained compounds are annealed at 600 and 800° C in the aim to modify the …
Enhancing magnetoresistive features of iron-substituted La0· 8Sr0· 2MnO3 ceramic manganites
The influence of iron content on the structural, microstructural, magnetic, and electrical-
transport features of the ceramic perovskite manganites of the form La 0· 8 Sr 0· 2 Mn 1-x Fe …
transport features of the ceramic perovskite manganites of the form La 0· 8 Sr 0· 2 Mn 1-x Fe …