WC–Co alloys have enjoyed great practical significance owing to their excellent properties
during the past decades. Despite the advantages, however, recently there have been …

Hardmetals (or cemented carbides) were invented a hundred years ago and became one of
the most important materials in engineering. The unique conjunction of fracture toughness …

Abstract A novel TiC/Ni 3 (Al, Ti)-NiAl composite has been designed and synthesized by in-
situ reactive hot-pressing a mixture of Ti 3 AlC 2 and Ni powders. After hot-press sintering at …

Ti (C, N)-based cermet is a kind of composite material composed of a metal binder phase
and a Ti (C, N)-hard phase, which is widely used in the fields of cutting machining and wear …

Ni 3 Al intermetallic compound was synthesized by mechanical milling mixture of elemental
Ni and Al powder after 20 h milling; mechanical alloying (MA) first generated a Ni (Al) solid …

The non-vacuum electron beam cladding technique was used to fabricate composite
coatings with WC on the surface of Ni 3 Al intermetallic. The microstructure and phase …

The current review gives an insight into high-entropy alloys (HEAs) as a new possible binder
material for the tungsten carbides, heavy tungsten alloys, and titanium carbo-nitride (Ti (C …

The cyclic oxidation of WC-Ni 3 Al composites with different WC content and Ni 3 Al alloy in
air at 900° C for 104 h was studied. WC-Ni 3 Al composite with a volume content of WC …

Phase relations in the ternary Ni–Al–Ga system at 700° C have been established by the X-
ray powder diffraction methods. In addition to already known Ni 3 (Al, Ga) continuous solid …

Tungsten forms with carbon several chemical compounds (see also section C–W in Table I-
2.13): tungsten monocarbide δ-WC1±x phase (hexagonal structured), having almost …