Magnesium alloys are preferred for applications requiring lightweight, high specific strength,
and stiffness since magnesium is the lightest of all structural metals with a density of 1.74 …

The high strength of most Mg-RE alloys is frequently accomplished by high RE addition, but
their high density and poor plasticity restrict their applications in the field of aerospace …

Microstructural evolution and mechanical properties of a Mg− 8Zn− 6Al− 1Gd (wt%) alloy
were thoroughly investigated in this work. The results indicate that the dominant intermetallic …

Intermetallic phases including precipitate constituents in both as-cast and peak-aged Mg–
8Zn–6Al-1Sm (wt%) alloys were investigated using transmission electron microscopy. In the …

The microstructures and tensile properties of Mg-4∼ 6Al-2∼ 4Zn-2∼ 3Ca-0∼ 1RE (in
wt.%) extruded alloys have been investigated. C15 and C36 Laves phases, Ca 2 Mg 6 Zn 3 …

With the increasing attention received by lightweight metals, numerous essential fields have
increased requirements for magnesium (Mg) alloys with good room-temperature and high …

Abstract An ultrathin wall Mg-8Zn-8Al (wt%) alloy was manufactured by high-pressure die
casting (HPDC), and exhibits standout strength of∼ 248 MPa with an acceptable elongation …

The tensile creep behavior of as-extruded and T6 treated Mg–8Gd–3Y–0.3 Zr (GW83) alloy
was estimated under temperature at 170–200° C and stress at 40–70 MPa. The results …

The effect of extrusion conditions on the tensile properties and texture of AZ31B alloy has
been investigated by means of optical microscopy (OM), scanning electron microscopy …

The tensile strengths of the as-extruded Mg–Al–Ca ternary alloys at both ambient and
elevated temperatures are enhanced via adding a high content of Ca element up to 6 wt …