Shear-banding is a ubiquitous plastic-deformation mode in materials. In metallic glasses,
shear bands are particularly important as they play the decisive role in controlling plasticity …

Phase separation phenomena in metallic glass systems are reviewed. First, a brief
introduction to the enhanced glass forming ability and the phase separation in metallic glass …

Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses
has been thoroughly updated and remains essential reading on the subject. It incorporates …

The development of bulk metallic glasses and composites for improving the mechanical
properties has occurred with the discovery of many ductile metallic glasses and glass matrix …

In the absence of dislocation-mediated crystallographic slip, room-temperature deformation
in metallic glasses occurs in thin shear bands initially only∼ 10 nm thick. A sharp drop in …

In this paper, we report the formation of a series Zr–(Cu, Ag)–Al bulk metallic glasses
(BMGs) with diameters at least 20mm and demonstrate the formation of about 25g …

Enhancement of plasticity and the occurrence of liquid-state phase separation have been
investigated by partially substituting Zr with Y in Cu46Zr47− xYxAl7 (x= 0, 2, 5, 10, 15, 20 …

Microstructural investigation of an as-cast Cu 47.5 Zr 47.5 Al 5 bulk metallic glass (BMG)
reveals two amorphous phases formed by liquid phase separation. The morphology of the …

Abstract Mg x (Ni 0.8 La 0.2) 100-x, where x= 60, 70, 80, exhibiting a nanocrystalline
microstructure, were prepared through the crystallization of amorphous alloys. The …

One-centimeter diameter fully glassy rods have been obtained using copper mold casting at
the Cu44. 25Ag14. 75Zr36Ti5 composition. Starting from the ternary glass Cu60Zr33Ti7 with …