Sheet metal forming (SMF) is one of the most popular technologies for obtaining finished
products in almost every sector of industrial production, especially in the aircraft, automotive …

This encyclopedia, written by authoritative experts under the guidance of an international
panel of key researchers from academia, national laboratories, and industry, is a …

Magnesium alloy sheets usually has to be processed by warm forming, and change of strain
path and evolution of microstructure can significantly influence their warm formability …

Magnesium AZ31 sheets were produced by rolling on the as-extruded plates with two rolling
techniques: cross rolling (CR), a laboratory process wherein the rolling direction is changed …

We experimentally and numerically examined the localization behavior of {10 1¯ 2}
extension twins in strongly and weakly textured AZ31 and ZEK100 magnesium alloys as …

In the present work, an efficient formulation for the prediction of forming-limit diagrams
(FLDs) based on the well-known Marciniak and Kuczynski (M− K) theory using a Visco …

Conventional experimental approaches used to generate forming limit diagrams (FLDs) for
sheet metals at different linear strain paths are not applicable to hot stamping and cold die …

In the present work, Mg-9Al-1Zn-0.4 Sn (AZT910) magnesium alloy sheets with a fine-
grained structure (∼ 5 μm) and tilting basal texture were prepared by a 16-passes rolling …

The hot formability of TA15 titanium alloy sheet was studied experimentally and theoretically.
The hot uniaxial tensile tests were conducted for further investigation on hot formability …

Evidence for the formation of geometrically necessary twins (GNTs), or twins that
accommodate a strain gradient in a multi-axial stress state, in quasi-static, room temperature …