The inter-critically reheated grain coarsened heat affected zone (IC GC HAZ) has been
reported as one of the most brittle section of high-strength low-alloy (HSLA) steels welds …

Abstract Two heats of Mn-Cr type bainitic forging steels with different amounts of V (0 and
0.13 wt%) were adopted to investigate their fatigue performance by rotating bar bending …

In this work, the effects of the addition of Nb and Al on the microstructures and tensile
behaviours of micro-alloyed powder metallurgy (PM) steels were investigated. The …

Low-carbon microalloyed steels are now extensively used in various branches of technology
and industry due to the excellent combination of the characteristics of strength, ductility …

High-cycle fatigue properties of medium carbon microalloyed (MA) steel 38MnVS with
different microstructural characteristics were studied by rotating bending fatigue test. Low …

This paper presents the experimental results of a study evaluating the mechanical and
fatigue performance of welded Fe-Mn-Si SMA. For the experimental study, welded and …

High-cycle fatigue properties of two ferritic-pearlitic medium-carbon forging steels 30MnVS
and 49MnVS with smooth and notched (stress concentration factor K t= 2.1 and 3.9) …

Fatigue crack growth is the essential process in the total life of components and is
unavoidable in most structures and machines. In this study, the effects of cementite particles …

The effect of vanadium on the phase transformation and performance of 82B steel was
studied. Continuous cooling transformation experiments and tensile tests were carried out …