The effect of sputtering power on structural, mechanical, and electrical properties of Copper Selenide Thermoelectric thin films deposited by magnetron sputtering
Abstract Copper Selenide (Cu 2 Se) has received much attention as a potential
thermoelectric and environmentally friendly material because of its exceptional …
thermoelectric and environmentally friendly material because of its exceptional …
Substrate temperature: A governing factor for the structural, mechanical and chemical properties of sputtered CrAlN ternary coating
In this article, the effect of substrate temperature towards the structural, microstructural and
mechanical properties of the Chromium-Aluminium-Nitride (CrAlN) films deposited on Si …
mechanical properties of the Chromium-Aluminium-Nitride (CrAlN) films deposited on Si …
Influence of annealing temperature on microstructural, mechanical and chemical properties of CrAlN coatings
CrAlN coatings were deposited using RF magnetron sputtering on to SS 304 substrates. To
check the thermal stability of the coatings, they were annealed in air from 500° C to 900° C …
check the thermal stability of the coatings, they were annealed in air from 500° C to 900° C …
Nitrogen pressure significantly impacts microstructures and mechanical properties of CrAlN coatings prepared by pulsed laser deposition
Z He, L Liu, J Wang, Z Geng, X Guo, J Peng, W Li… - Ceramics …, 2024 - Elsevier
The effect of nitrogen pressure on the crystalline phase, composition, microstructure, and
mechanical properties of chromium aluminum nitride (CrAlN) coatings prepared by pulsed …
mechanical properties of chromium aluminum nitride (CrAlN) coatings prepared by pulsed …
Evaluation of substrate temperature role on the structural, morphological, optical, and mechanical properties of magnetron sputtered Cu2Se thin films
Abstract Copper Selenide (Cu 2 Se) thin films were deposited on a float glass substrate
using magnetron sputtering with a radio frequency (RF) source at a power of 70 W and by …
using magnetron sputtering with a radio frequency (RF) source at a power of 70 W and by …
Tailoring structural features and corrosion-related behaviors of CrSiN ternary coatings utilizing MIS-HiPIMS at low temperature
B Gui, M Zhao, H Zhou, T Zhang, L Yang, Z Ma - Ceramics International, 2024 - Elsevier
With the aim to accomplish controllable preparation of high-performance ceramic coatings at
low temperature, a series of CrSiN ternary coatings were prepared utilizing MIS-HiPIMS …
low temperature, a series of CrSiN ternary coatings were prepared utilizing MIS-HiPIMS …
Optimizing thermoelectric power factor in magnetron sputtered Cu2Se thin films by varying substrate temperature and synergy of Cu/Se ratio
Abstract Copper selenide (Cu 2 Se) is recognized as a p-type thermoelectric (TE)
semiconductor known for its eco-friendliness, abundance in the earth's crust, and cost …
semiconductor known for its eco-friendliness, abundance in the earth's crust, and cost …
Modeling of cracking behavior of CrAlN coatings on silicon during micro-and nanoindentation
MM Kharkov, L Xuan, AV Tumarkin, AA Prosolov… - Materials Chemistry and …, 2024 - Elsevier
The deformation and failure behavior of any coating governs the performance of the
resulting coating system. In the present work, we numerically and experimentally examine …
resulting coating system. In the present work, we numerically and experimentally examine …
Optimizing CrAlN Coatings: Effects of Deposition Temperature on Mechanical, Tribological, and Wettability Properties
MS BOUAMERENE, TD ATMANI, L AISSANI… - Materials Today …, 2024 - Elsevier
With the aim of improving the lifespan of different steel tools by reducing their degradation,
CrAlN nitride coatings were investigated. The CrAlN coatings were deposited on …
CrAlN nitride coatings were investigated. The CrAlN coatings were deposited on …
Quantitative characterization on influence of surface particles on corrosion behavior of multiarc ion plated CrAlN coatings
J Zhang, Q Zhang, H Wu, X Lian, C Ge… - Journal of Vacuum …, 2024 - pubs.aip.org
Surface particles on multiarc ion plated coatings are common defects, and their influence on
the service performance of coatings is rarely defined. The CrAlN coatings were deposited on …
the service performance of coatings is rarely defined. The CrAlN coatings were deposited on …