[HTML][HTML] Constitutive modelling of the 6061 aluminium alloy under hot rolling conditions and large strain ranges
Constitutive models were built based on the results of isothermal hot compression tests for a
6061 aluminium alloy at temperatures of 400, 450, 500, and 550° C and strain rates of 0.1, 1 …
6061 aluminium alloy at temperatures of 400, 450, 500, and 550° C and strain rates of 0.1, 1 …
Modelling of hot flow behaviors of aluminum alloy Al6061 at elevated temperature: A review
In this study, plastic flow behaviors of aluminum alloys at elevated temperatures are studied
to establish the engineering foundation of hot metal forming of aluminum alloys. Various …
to establish the engineering foundation of hot metal forming of aluminum alloys. Various …
Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling
Abstract Peak-aged Al-Mg-Si alloys fabricated through a combination of hot extrusion and
cold rolling were studied, and the microstructure evolution, mechanical properties, plastic …
cold rolling were studied, and the microstructure evolution, mechanical properties, plastic …
Low-rank approximation of local strain in two-phase composites
This study presents the development of a computationally efficient mathematical framework
for predicting the meso-scale (local) strain field for two-phase composites under mechanical …
for predicting the meso-scale (local) strain field for two-phase composites under mechanical …
Indentation of Commercial Pure Titanium Processed by Cold Rolling
D Zhou, J Yu, Y Dong, Y Qin, X Hao - Metals, 2024 - mdpi.com
In this work, the effects of plastic deformation on the indentation behaviors of commercial
pure titanium alloy were investigated. Titanium experienced various kinds of deformation by …
pure titanium alloy were investigated. Titanium experienced various kinds of deformation by …
Effect of plastic deformation and texture on corrosion of cold-rolled AA6061 in NaCl neutral solution
D Zhou, T Li, J Fan - Metals and Materials International, 2022 - Springer
Abstract Effects of plastic deformation on the corrosion behaviors of AA6061 aluminum alloy
have been investigated in this work. AA6061 was severely deformed by cold rolling …
have been investigated in this work. AA6061 was severely deformed by cold rolling …
Influence of Mg/Si ratio on the microstructure and formability of 6061 cast-rolled sheets
YC Sun, YH Jin, Z Xu, T Zhao, N Wang… - Materials Research …, 2024 - iopscience.iop.org
Three kinds of 6061 aluminum alloy cast-rolled plates with Mg/Si mass ratios of 1.23, 1.45,
and 1.7 are prepared using NF6–300 vertical twin-roll casting and rolling mill. Metallurgical …
and 1.7 are prepared using NF6–300 vertical twin-roll casting and rolling mill. Metallurgical …
Study of Improvement of an Aluminium Alloy Used in the Aeronautical Industry
JL Oliveira - 2019 - search.proquest.com
JOÃO LIMA OLIVEIRA ESTUDO DE MELHORIA DE UMA LIGA DE ALUMÍNIO UTILIZADA NA
INDÚSTRIA AERONÁUTICA STUDY OF IMPROVEMENT OF A Page 1 Universidade de Aveiro …
INDÚSTRIA AERONÁUTICA STUDY OF IMPROVEMENT OF A Page 1 Universidade de Aveiro …