Cold sintering: progress, challenges, and future opportunities
Cold sintering is an unusually low-temperature process that uses a transient transport
phase, which is most often liquid, and an applied uniaxial force to assist in densification of a …
phase, which is most often liquid, and an applied uniaxial force to assist in densification of a …
Cold sintering: Current status and prospects
JP Maria, X Kang, RD Floyd, EC Dickey… - Journal of Materials …, 2017 - cambridge.org
This manuscript describes, defines, and discusses the process of cold sintering, which can
consolidate a broad set of inorganic powders between room temperature and 300° C using …
consolidate a broad set of inorganic powders between room temperature and 300° C using …
Cold sintering of microwave dielectric ceramics and devices
Microwave (MW) dielectric ceramics are used in numerous electronic components for
modern wireless communication systems, including antennas, resonators, capacitors and …
modern wireless communication systems, including antennas, resonators, capacitors and …
Cold sintering of ceramics and glasses: A review
C Vakifahmetoglu, L Karacasulu - Current Opinion in Solid State and …, 2020 - Elsevier
Traditionally ceramic artifacts are processed at high temperatures (> 1000° C) by classical
sintering techniques such as solid state, liquid phase and pressure-assisted sintering …
sintering techniques such as solid state, liquid phase and pressure-assisted sintering …
Cold sintered CaTiO3-K2MoO4 microwave dielectric ceramics for integrated microstrip patch antennas
Abstract CaTiO 3-K 2 MoO 4 (CTO-KMO) dielectric composites were successfully cold-
sintered at 150° C for 30 min with a uniaxial pressure of 200 MPa. X-ray diffraction, Raman …
sintered at 150° C for 30 min with a uniaxial pressure of 200 MPa. X-ray diffraction, Raman …
Direct integration of cold sintered, temperature-stable Bi2Mo2O9-K2MoO4 ceramics on printed circuit boards for satellite navigation antennas
Abstract Bi 2 Mo 2 O 9-K 2 MoO 4 (BMO-KMO) composite ceramics with> 95% theoretical
density were densified by cold sintering at 150° C. XRD, Raman, back-scattered SEM and …
density were densified by cold sintering at 150° C. XRD, Raman, back-scattered SEM and …
5G microstrip patch antenna and microwave dielectric properties of cold sintered LiWVO6–K2MoO4 composite ceramics
Abstract In this paper,(1-x) LiWVO 6-xK 2 MoO 4 (LWVO-KMO, x= 60, 65, 70, 75, 80, 90 wt%)
composite ceramics with> 92% relative density were prepared by cold sintering at 160° C …
composite ceramics with> 92% relative density were prepared by cold sintering at 160° C …
Microwave dielectric properties of mineral sillimanite obtained by conventional and cold sintering process
IJ Induja, MT Sebastian - Journal of the European Ceramic Society, 2017 - Elsevier
Abstract The sillimanite (Al 2 SiO 5) mineral has been sintered by conventional ceramic
route and by cold sintering methods. The mineral has very poor sinterability and transformed …
route and by cold sintering methods. The mineral has very poor sinterability and transformed …
Cold sintered LiMgPO4 based composites for low temperature co‐fired ceramic (LTCC) applications
Abstract Cold sintered, Li2MoO4‐based ceramics have recently been touted as candidates
for electronic packaging and low temperature co‐fired ceramic (LTCC) technology but MoO3 …
for electronic packaging and low temperature co‐fired ceramic (LTCC) technology but MoO3 …
Cold‐sintered C0G multilayer ceramic capacitors
Multilayer ceramic capacitors (MLCCs) based on (Bi0. 95Li0. 05)(V0. 9Mo0. 1) O4‐
Na2Mo2O7 (BLVMO‐NMO), with εr= 39, temperature coefficient of capacitance …
Na2Mo2O7 (BLVMO‐NMO), with εr= 39, temperature coefficient of capacitance …