An overview of additive manufacturing of polymers and associated composites
Additive manufacturing is rapidly evolving and opening new possibilities for many industries.
This article gives an overview of the current status of additive manufacturing with polymers …
This article gives an overview of the current status of additive manufacturing with polymers …
Recent advances in fused deposition modeling based additive manufacturing of thermoplastic composite structures: A review
Fused deposition modeling (FDM) is one of the leading emerging technologies of Industry
4.0, which has been employed to develop sustainable engineering products, customized …
4.0, which has been employed to develop sustainable engineering products, customized …
Mechanical, thermal, and flammability properties of polyamide-6 reinforced with a combination of carbon nanotubes and titanium dioxide for under-the-hood …
The current study aims to explore the tensile fracture mechanism and thermo-mechanical
efficiency of polyamide-6 (PA6) reinforced with titanium dioxide (TiO2) and multiwalled …
efficiency of polyamide-6 (PA6) reinforced with titanium dioxide (TiO2) and multiwalled …
Integrated control mechanism of ultrasound and ZrO2 particles on differential microstructures for the wire arc additive manufacturing
Inhibiting unhomogenised microstructure during the directed energy deposition process with
the electric arc energy source (DED-Arc) has become a significant challenge. Ultrasonic …
the electric arc energy source (DED-Arc) has become a significant challenge. Ultrasonic …
Effect of process variables on performances measured in filament and pellet based extrusion process
Material extrusion is a type of non-beam based additive manufacturing (AM) process. In the
material extrusion based AM process, molten liquid is extruded layer by layer, selectively …
material extrusion based AM process, molten liquid is extruded layer by layer, selectively …
Development of new nanocomposites for 3D printing applications
Two emerging research area such as nanotechnology and additive manufacturing (AM) can
synergically interact with mutual benefits. In fact, nanotechnology can lay the basis for new …
synergically interact with mutual benefits. In fact, nanotechnology can lay the basis for new …
Stage dependent strengthening of fused filament fabricated components
Recent improvements in the fused filament fabrication (FFF) technique have extended its
usage for the manufacturing of finished products in a variety of engineering fields. However …
usage for the manufacturing of finished products in a variety of engineering fields. However …
Dispersion and improvement of organoclays in nanocomposites based on poly (propylene oxide)
L Mrah, R Meghabar - Journal of Thermoplastic Composite …, 2022 - journals.sagepub.com
This work is mainly concentrated on the preparation and characterization of poly (propylene
oxide)(PPO)/organic clay nanocomposites. The effects of the nature of organoclays and the …
oxide)(PPO)/organic clay nanocomposites. The effects of the nature of organoclays and the …
CFD analysis in a heating bed with two inlets and one outlet cooling configuration for application in AM process
Temperature values and its gradient are of key importance during the deposition of material
in additive manufacturing process. Majorly, temperature governs the cooling and …
in additive manufacturing process. Majorly, temperature governs the cooling and …
Experimental investigation of nozzle clogging using vibration signal-based condition monitoring for fused deposition modeling
Fused deposition modeling (FDM) or 3D printing is one of the promising techniques widely
preferred to fabricate complex and customized 3D objects or prototypes for various …
preferred to fabricate complex and customized 3D objects or prototypes for various …