The mechanical features evaluated theoretically using Makishima-Mackenzie's model for
glasses xBaO-(50-x) PbO–50P 2 O 5 where x= 0, 5, 10, 15, 20, 30, 40, and 50 mol …

FTIR, density, molar volume and DC conductivity of xBaO∙(50-x) PbO∙ 50P 2 O 5 (0≤ x≤ 50
mol%) have been investigated to elucidate the role of Ba 2+ and Pb 2+ ions and their effect …

In this work, the electrical and optical properties of glasses and glass-ceramics are
presented and discussed in details. Several electrical and optical parameters for glasses …

The current study focuses on glass preparation and characterization in the glass system of
chemical formula xAl 2 O 3 (35-x) Ag 2 O. 65B 2 O 3 (0≤ x≤ 35 mol%), where Ag 2 O is …

Structural, density, mechanical, electrical and shielding properties of xLi2O·(49.5-x) BaO·
50P2O5· 0.5 CuO (0≤ x≤ 49.5 mol%) glasses have been studied. XRD patterns and SEM …

The influence of thin gold electrodes on the electrical measurements of glasses at high
temperatures was studied using impedance spectroscopy. The impedance was measured …

Abstract In this study, Fe-Al2O3-SiO2-P2O5 (FASP) glass–ceramic was prepared by heating
Fe-acid-based geopolymer at 1050° C. The Fe-geopolymer was obtained by mixing …

In this study, the nature of the electrical transport and structural changes resulting from the
systematic substitution of Al2O3 with K2O in 40P2O5-(25− x) Al2O3-35Na2O-x K2O, where …

Six glass compositions based on basaltic rocks and some industrial wastes, Batches were
melted in an electric furnace at temperature 1400° C for 2 h and then casted into rods and …

Abstract Na-Fe-Al-PON glasses have been successfully prepared by melting batches at
1050–1150° C under N 2 atmosphere. The amorphous nature of the Na-Fe-Al-PON glasses …