Hybrid car bodies fabricated by joining parts made with steel and aluminum alloys are
becoming increasingly common. This provides an affordable mean to decrease the car …

Multi-material design is a viable approach to reduce fuel consumption as well as
environmentally unfriendly gas emissions. Aluminum is being increasingly used to replace …

This experimental investigation describes the effect of tilt angle and rotational speed on the
characteristics of welding defects, intermetallic compounds, weld strength and micro …

In this work, novel CMT+ P weld-brazing process was used for joining aluminium (AA5052)
and steel (DP780) in lap position with increasing Al sheet thickness. Results showed that …

A modified metal inert gas (MIG) welding-brazing process of aluminum and steel with the
assistance of external magnetic field (EMF) was proposed in this study. An alternative EMF …

Formation of porosity and intermetallic compounds (IMCs) were studied in electron beam
welded (EBW) DP-600 steel to Al-5754 alloy joints at three different weld conditions such as …

In automobile industries production of lightweight vehicles to increase the performance of a
vehicle, reduction in fuel consumption, and the low emission of toxic gases have generated …

In this paper, the aluminum/iron bimetallic composites were successfully fabricated using
ZL114A alloy and gray cast iron by hot-dip galvanizing and aluminizing method, and the …

Abstract Ternary Zinc–Aluminum–Magnesium coatings are attracting significant attention in
the automotive and steel industries because of their superior corrosion resistance and …

In this study, cold metal transfer (CMT) brazing technique was used for lap joining of 1.2 mm
thick galvanized dual phase (DP780) steel using CuAl10Fe filler wire. The aim of this study …