[HTML][HTML] Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community
Since decades, protective hard coatings with thicknesses of a few micrometers are grown by
physical or chemical vapor deposition (PVD, CVD) on cutting tools to improve their …
physical or chemical vapor deposition (PVD, CVD) on cutting tools to improve their …
Architecture of PVD coatings for metalcutting applications: A review
A Inspektor, PA Salvador - Surface and Coatings Technology, 2014 - Elsevier
The metalcutting process, which includes turning, milling, drilling, and other methods for
shaping metals, generates large mechanical forces and high temperatures at the point of …
shaping metals, generates large mechanical forces and high temperatures at the point of …
[HTML][HTML] Precipitation-based grain boundary design alters Inter-to Trans-granular Fracture in AlCrN Thin Films
M Meindlhumer, T Ziegelwanger, J Zalesak, M Hans… - Acta materialia, 2022 - Elsevier
Despite their high hardness and indentation modulus, nanostructured crystalline ceramic
thin films produced by physical vapour deposition usually lack sufficient fracture strength …
thin films produced by physical vapour deposition usually lack sufficient fracture strength …
[HTML][HTML] Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thickness
F Frank, C Kainz, M Tkadletz, C Czettl, M Pohler… - Surface and Coatings …, 2022 - Elsevier
Modifying the architecture of multilayer hard coatings allows to adjust the mechanical
properties of these materials for a given application. Within this work, the effect of the bilayer …
properties of these materials for a given application. Within this work, the effect of the bilayer …
The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior
M Tkadletz, C Mitterer, B Sartory… - Surface and Coatings …, 2014 - Elsevier
Hard coatings deposited by cathodic arc evaporation are often characterized by droplets,
deteriorating their surface roughness and oxidation resistance. Within this work, the …
deteriorating their surface roughness and oxidation resistance. Within this work, the …
Dense and high-stability Ti2AlN MAX phase coatings prepared by the combined cathodic arc/sputter technique
Z Wang, J Liu, L Wang, X Li, P Ke, A Wang - Applied Surface Science, 2017 - Elsevier
Ti 2 AlN belongs to a family of ternary nano-laminate alloys known as the MAX phases,
which exhibit a unique combination of metallic and ceramic properties. In the present work …
which exhibit a unique combination of metallic and ceramic properties. In the present work …
Comparative study on mechanical and tribological properties of Cr–Al–N and Cr–Al–O coatings deposited by cathodic arc evaporation
A comparative study was performed for (Cr 1− x Al x) 2 O 3 and (Cr 1− x Al x) N coatings with
different Al contents (x= 0, 0.5, and 0.7) concerning structural, mechanical, and tribological …
different Al contents (x= 0, 0.5, and 0.7) concerning structural, mechanical, and tribological …
Structural and mechanical properties of Cr–Al–O–N thin films grown by cathodic arc deposition
A Khatibi, J Sjölen, G Greczynski, J Jensen, P Eklund… - Acta materialia, 2012 - Elsevier
Coatings of (CrxAl1− x) δ (O1− yNy) ξ with 0.33⩽ x⩽ 0.96, 0⩽ y⩽ 1 and 0.63⩽ δ/ξ⩽ 1.30
were deposited using cathodic arc evaporation in N2/O2 reactive gas mixtures on 50V …
were deposited using cathodic arc evaporation in N2/O2 reactive gas mixtures on 50V …
The influence of substrate bias on the surface morphology, microstructure and mechanical behaviour of TiNiN coatings
The application of a negative substrate bias during physical vapor deposition can have
important effects on the surface morphology, structure and properties of ceramic-based …
important effects on the surface morphology, structure and properties of ceramic-based …
Effect of Ni content on the microstructure and mechanical properties of TiNiN coatings
Incorporation of Ni can have intriguing effects on the phase composition, microstructure and
mechanical characteristics of titanium nitride coatings synthesised by physical vapour …
mechanical characteristics of titanium nitride coatings synthesised by physical vapour …