Abstract Al-Mg-Si alloys with high strength and good corrosion resistance are regarded as
desirable materials for all-aluminum vehicles. However, the traditional trial-and-error …

The electrochemical behaviors and coupling behaviors of the Mg2Si and Si phases with α
(Al) were investigated, the corrosion morphologies of Al alloys containing Mg2Si and Si …

The effect of artificial aging parameters on the corrosion performance of air cooled AlMgSi
(Cu) model alloy extrusions was investigated. Accelerated corrosion test revealed that the …

Specially prepared 6xxx series aluminium alloys (Al–Mg–Si) with different Mg/Si ratios and
Cu contents were investigated in the naturally aged, under-aged, peak-aged and over-aged …

The microstructure and intergranular corrosion have been studied in an extruded and aged
Al-Mg-Si alloy doped with 0.05 wt% Cu after immersing the material in an acidified salt …

In Al–Mg–Si alloys, MgSi and Si precipitates are reported to activate corrosion processes.
However, their impact is not completely clear because only indirect studies on the influence …

Although the various advantages of novel Friction stir welding (FSW) process; the weld
surfaces are subjected to various serious problems such as lower corrosion resistance, high …

In the present work, the influence of trace level Cu on intergranular corrosion (IGC) in
AA6082 Al–Mg–Si alloy is studied using correlative accelerated corrosion testing and high …

New longer-term observations of corrosion and pitting of 6060-grade aluminium alloy
showed that the most intensive pitting and corrosion occurred in the marine immersion zone …

The influence of quench cooling rate on corrosion behaviour of AA6082-T6 Al-Mg-Si alloy
extrusion is investigated. It is revealed that different quench cooling rates result in significant …