Production of metals stands for 40% of all industrial greenhouse gas emissions, 10% of the
global energy consumption, 3.2 billion tonnes of minerals mined, and several billion tonnes …

In this work, we present a novel hybrid approach to describe and model the creep behaviour
of tempered martensitic steels. The hybrid approach couples a physically based model with …

The creep properties of 9Crsingle bond1Mo welded joint are determined by special zone
(SZ) in equiaxed grain zone of welded metal (WM) suffered from multiple thermal cycles …

12% Cr martensitic heat-resistant steels (MHRS) are the key materials for making ultra
supercritical (USC) unites turbine blades. In this study, the anisotropy of mechanical …

In this work, the creep behaviour of an actual thick-walled P92 steel pipe bent (90°) using
local induction heating was investigated at 600 and 650° C using uniaxial tension creep …

In this paper, evolution of Laves phase in weld metal (WM) during long-term creep exposure
was investigated for modified 9Cr-1.5 Mo-1Co steel welded joint (WJ) by microstructure …

The microstructural evolution and the effect on the strength of G115 steel after creep under
923 K and 130 MPa for up to 7288 h were systematically investigated using OM, SEM and …

The mechanism for creep rupture of 12% Cr/alloy 4715 welded joints was investigated by
employing traditional uniaxial tensile creep in this study. The creep tests were maintained at …

Machining tools are used in many areas of production. To a considerable extent, the
performance characteristics of the tools determine the quality and cost of obtained products …

The impact toughness of a martensitic 12 Cr-0.6 Mo-2.2 W-4 Co-0.8 Cu-VNb (in wt pct) steel
subjected to tempering at 770° C for 3 hours and aging at 650° C for 643 hours was …