High strength and ductility aluminium alloy processed by high pressure die casting
A high strength (Yield strength≥ 320 MPa) and high ductility (Tensile elongation≥ 10%) die–
cast aluminium alloy was first developed. The AlSiCuMgMn alloy processed by high …
cast aluminium alloy was first developed. The AlSiCuMgMn alloy processed by high …
Effect of super vacuum assisted high pressure die casting on the repeatability of mechanical properties of Al-Si-Mg-Mn die-cast alloys
Two-stage super vacuum (19 mbar) assisted high pressure die casting (HPDC) was
achieved by evacuating from the die cavity and the shot sleeve simultaneously. The effect of …
achieved by evacuating from the die cavity and the shot sleeve simultaneously. The effect of …
Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys
To reveal the influence of porosity on the variability in mechanical properties of HPDC Al
alloys, micro computed tomography was employed to investigate the morphology and 3D …
alloys, micro computed tomography was employed to investigate the morphology and 3D …
Multi-physics multi-scale simulation of the solidification process in the molten pool during laser welding of aluminum alloys
P Jiang, S Gao, S Geng, C Han, G Mi - … Journal of Heat and Mass Transfer, 2020 - Elsevier
The solidification microstructures directly determine the performance of laser welds.
However, the present understanding of the dynamic solidification behavior within the melt …
However, the present understanding of the dynamic solidification behavior within the melt …
[HTML][HTML] High performance Al/TiB2 composites fabricated by nanoparticle reinforcement and cutting-edge super vacuum assisted die casting process
The structural lightweight in automotive and other industries motivates the usage of high
strength die-cast aluminium alloys. However, the improvements of die-cast aluminium alloys …
strength die-cast aluminium alloys. However, the improvements of die-cast aluminium alloys …
[HTML][HTML] Microstructure features and mechanical properties of non-heat treated HPDC Al9Si0. 6Mn–TiB2 alloys
C Hu, H Zhu, Y Wang, C Xia, J Geng, D Chen… - Journal of Materials …, 2023 - Elsevier
This study aimed to enhance the mechanical properties of high pressure die casting (HPDC)
Al9Si0. 6Mn alloys by incorporating in-situ TiB 2 particles. The effects of TiB 2 addition on …
Al9Si0. 6Mn alloys by incorporating in-situ TiB 2 particles. The effects of TiB 2 addition on …
[HTML][HTML] Effect of Gd on the microstructure and mechanical properties of high-pressure die-cast Mg-La-Ce alloys at ambient and elevated temperatures
The microstructure and tensile properties of die-cast Mg-1.6 wt% La-1.0 wt% Ce alloys with
Gd content ranging from 0 wt% to 3.0 wt% were investigated. The major intermetallic …
Gd content ranging from 0 wt% to 3.0 wt% were investigated. The major intermetallic …
Synergistic effects of Ce and Mg on the microstructure and tensile properties of Al-7Si-0.3 Mg-0.2 Fe alloy
J Kang, R Su, DY Wu, CH Liu, T Li, LS Wang… - Journal of Alloys and …, 2019 - Elsevier
The effects of Ce and/or Mg on the microstructure and tensile properties of Al-Si-Mg-Fe
alloys have been systematically investigated. Results showed that the separate addition of …
alloys have been systematically investigated. Results showed that the separate addition of …
New insights into the characterization and formation of the interface of A356/AZ91D bimetallic composites fabricated by compound casting
In the present study, the A356/AZ91D bimetallic composites were prepared by the lost foam
casting (LFC) solid–liquid compound process, and the characterization and formation of the …
casting (LFC) solid–liquid compound process, and the characterization and formation of the …
Effect of Zr on the high cycle fatigue and mechanical properties of Al–Si–Cu–Mg alloys at elevated temperatures
G Liu, P Blake, S Ji - Journal of Alloys and Compounds, 2019 - Elsevier
Abstract The Zr-modified Al–Si–Cu–Mg alloy with 0.14 wt% Zr addition was studied against
the counterparts of commercially used EN-AC-42000 (Al7Si0. 5Cu) baseline alloy for the …
the counterparts of commercially used EN-AC-42000 (Al7Si0. 5Cu) baseline alloy for the …