[HTML][HTML] Reliability and interpretation of the microstructural parameters determined by X-ray line profile analysis for nanostructured materials
J Gubicza - The European Physical Journal Special Topics, 2022 - Springer
In this overview, the applicability of X-ray diffraction line profile analysis (XLPA) for the
characterization of the microstructure in nanostructured materials is overviewed. The …
characterization of the microstructure in nanostructured materials is overviewed. The …
Lattice defects and their influence on the mechanical properties of bulk materials processed by severe plastic deformation
J Gubicza - Materials Transactions, 2019 - jstage.jst.go.jp
Processing of metallic materials by Severe Plastic Deformation (SPD) leads to the formation
of many lattice defects (eg, vacancies, dislocations, twin faults and grain boundaries). In this …
of many lattice defects (eg, vacancies, dislocations, twin faults and grain boundaries). In this …
Thermal stability behaviors of ultrafine-grained Cu-Cr-Zr alloy processed by friction stir processing and rolling methods
YD Wang, FC Liu, P Xue, H Zhang, LH Wu… - Journal of Alloys and …, 2023 - Elsevier
In order to investigate the effect of different microstructures on thermal stability, the thermal
stability behaviors of ultrafine-grained Cu-Cr-Zr alloy processed by friction stir processing …
stability behaviors of ultrafine-grained Cu-Cr-Zr alloy processed by friction stir processing …
The influence of severe plastic deformation and subsequent annealing on the microstructure and hardness of a Cu–Cr–Zr alloy
G Kapoor, T Kvackaj, A Heczel, J Bidulská, R Kočiško… - Materials, 2020 - mdpi.com
A Cu–1.1% Cr–0.04% Zr (wt.%) alloy was processed by severe plastic deformation (SPD)
using the equal channel angular pressing (ECAP) technique at room temperature (RT). It …
using the equal channel angular pressing (ECAP) technique at room temperature (RT). It …
The damage mechanism in copper studied using in situ TEM nanoindentation
Copper (Cu) has a soft-plastic nature, which makes it susceptible to damages from
scratching or abrasive machining, such as lapping and polishing. It is a challenge to control …
scratching or abrasive machining, such as lapping and polishing. It is a challenge to control …
Mechanical properties of rolled copper foils in cryogenic and room‐temperature environments
The mechanical properties of high‐purity asymmetric rolled copper foils under cryogenic‐
temperature and room‐temperature conditions are studied. The experimental results show …
temperature and room‐temperature conditions are studied. The experimental results show …
Effect of forging type on the deformation heterogeneities in multi-axial diagonal forged AA1100
MS Kim, SC Kwon, ST Kim, S Lee, HT Jeong… - Metals and Materials …, 2019 - Springer
The present study investigated the effects that different types of forging exert on the
deformation heterogeneities developed in AA1100 during multi-axial diagonal forging. To …
deformation heterogeneities developed in AA1100 during multi-axial diagonal forging. To …
[PDF][PDF] Theoretical-experimental possibillities of microstructure quantification of dispersion strengthened materials
M Besterci, K Sülleiová - Acta Metallurgica Slovaca, 2019 - pdfs.semanticscholar.org
The present paper is devoted to the possibilities to classify the spatial arrangement of the
elements (features) of a stochastic process with geometrical objects. The fundamental …
elements (features) of a stochastic process with geometrical objects. The fundamental …
Evaluation of Powder Metallurgy Workpiece Prepared by Equal Channel Angular Rolling
R Kočiško, T Kvačkaj, J Bidulská, R Bidulský… - Materials, 2023 - mdpi.com
The aim of the article is to examine the workability of sintered powder material of aluminum
alloy (Alumix 321) through severe plastic deformations under the conditions of the equal …
alloy (Alumix 321) through severe plastic deformations under the conditions of the equal …
Mapping dislocation densities resulting from severe plastic deformation using large strain machining
The multiplication of dislocations determines the trajectories of microstructure evolution
during plastic deformation. It has been recognized that the dislocation storage and the …
during plastic deformation. It has been recognized that the dislocation storage and the …