During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

We have studied the microstructure evolution and deformation behavior of Mg-5Gd-3Y-(1Sn)-
0.5 Zr alloys during hot compression (T= 350° C, 400° C, 450° C and 500° C, ε˙= 0.002 s− 1 …

Hot compression tests of Mg-Gd-Y-Zr alloy at different deformation temperatures and strains
were carried out with Gleeble-1500 simulator at strain rate of 0.002 s− 1. The microstructure …

We elucidate the effect of lanthanum (La) on the grain refinement of Mg-3Sn-1Mn alloy
during accumulative hot rolling. The lath-shaped Mg 2 Sn phase in the Mg-3Sn-1Mn alloy is …

The hot deformation behavior of Mg-9.16 Gd-3.03 Y-1.44 Zn-0.61 Zr alloy was examined by
hot compression experiments at 623–753 K with strain rates 0.1–20 s− 1. Flow stress-strain …

Many applications with potential use of high entropy alloys (HEAs) involve thermo-
mechanical processing. The principal aim of this study is to elucidate the deformation …

The introduction of long period stacking ordered (LPSO) phase is an effective way to
improve the performance of the magnesium alloys at elevated temperatures. In this paper …

The microstructure and microtexture of an extruded and annealed GWZ (Mg-8.2 Gd-3.6 Y-
1.6 Zn-0.5 Zr, wt.%) magnesium alloy was recorded strain by strain in the course of …

The effect of repetitive upsetting and extruding (RUE) on microstructure, texture and
mechanical properties anisotropy of Mg-9Gd-4Y–2Zn-0.4 Zr alloy was investigated. The …

The effects of hydrostatic pressure on grain refinement and deformation behaviors of Mg–
13Gd–4Y–2Zn–0.5 Zr alloy were investigated. With the increase of hydrostatic pressure, the …