Synthesis of porous Ti–50Ta alloy by powder metallurgy
The aim of the present study was to assess the possibility of producing porous Tisingle
bond50Ta (wt%) alloys using powder metallurgy by characterizing the material properties …
bond50Ta (wt%) alloys using powder metallurgy by characterizing the material properties …
SHS powders for thermal spray coating
T Talako, A Ilyuschenko, A Letsko - KONA Powder and Particle …, 2009 - jstage.jst.go.jp
The possibilities of preparing advanced powders for thermal spraying functional coatings by
the method of self-propagating high-temperature synthesis are discussed in this review …
the method of self-propagating high-temperature synthesis are discussed in this review …
Porous functionally graded material based on a new Ti‐25Nb‐5Zr‐(2Sn) alloy produced using the powder metallurgy technique
Developments in engineering and medicine have allowed patients' health and quality of life
to be supported by implants. Unfortunately, widely used titanium-based alloys with …
to be supported by implants. Unfortunately, widely used titanium-based alloys with …
[PDF][PDF] Tribological properties of hybrid composites containing two carbide phases
A Dolata-Grosz, J Wieczorek - Archives of Materials Science and …, 2007 - academia.edu
Purpose: The article presents the research results on tribological properties (friction
coefficient, wear) of the frictional couple cast iron-composite. The subject of that research …
coefficient, wear) of the frictional couple cast iron-composite. The subject of that research …
(Ti, Cr) C-based cermets with varied NiCr binder content via elemental SHS for perspective cutting tools
S Vorotilo, PV Kiryukhantsev-Korneev, BS Seplyarskii… - Crystals, 2020 - mdpi.com
The effects of granulation of reactive mixtures Ti-Cr-C and Ti-Cr-C-Ni on the combustion
temperature and velocity, as well as phase composition and mechanical properties …
temperature and velocity, as well as phase composition and mechanical properties …
Effect of milling time and presence of Sn on the microstructure and porosity of sintered Ti-10Ta-8Mo and Ti-10Ta-8Mo-3Sn alloys
The aim of the present study was to assess the influence of the milling time (10 h, 15 h and
20 h) on the structure and properties of Ti-10Ta-8Mo (wt.%) and Ti-10Ta-8Mo-3Sn (wt.%) …
20 h) on the structure and properties of Ti-10Ta-8Mo (wt.%) and Ti-10Ta-8Mo-3Sn (wt.%) …
Structure characterization of biomedical Ti-Mo-Sn alloy prepared by mechanical alloying method
The study presents the results of the influence of high energy milling on the structure of the
new Ti-15Mo-5Sn [wt%] alloy for biomedical applications. During testing the powders were …
new Ti-15Mo-5Sn [wt%] alloy for biomedical applications. During testing the powders were …
[PDF][PDF] X-ray and SEM studies on zirconia powders
Purpose: The microstructure characterization of commercially available zirconia powders
was the purpose of this paper. Different methods of structure analysis were applied owing to …
was the purpose of this paper. Different methods of structure analysis were applied owing to …
Role of Sn as a process control agent on mechanical alloying behavior of nanocrystalline titanium based powders
In this study, the effects of Sn as a process control agent (PCA) on the final powder sizes,
morphology, homogenization and alloying process of a new titanium alloy were …
morphology, homogenization and alloying process of a new titanium alloy were …
[PDF][PDF] Microstructure and magnetic properties of commercial barium ferrite powders
R Nowosielski, R Babilas, J Wrona - Journal of Achievements in …, 2007 - researchgate.net
Purpose: Microstructural and magnetic properties analysis of commercial barium ferrite
powder BaFe12O19. Design/methodology/approach: The X-ray diffraction methods were …
powder BaFe12O19. Design/methodology/approach: The X-ray diffraction methods were …