MXenes are recently discovered 2D nanomaterial with superior mechanical, thermal, and
tribological properties, being commonly employed in a wide variety of critical research …

Since the early '90s in last century, an interesting combination of metallic and ceramic-like
properties of MAX phases have motivated the development of MAX/metal matrix composites …

The preparation of cermet-modified layers on the surface of titanium alloys using lasers is an
effective method to improve their wear resistance. In this study, a typical Ti–TiN composite …

Abstract Two-dimensional (2D) MXenes have attracted much attention due to their unique
structural characteristics and novel performance in a variety of functions. The fabrication of …

Simultaneously increasing the strength and ductility of hot work die steels is of significant
interest for broad applications. The in-situ development of a nano-phase in steels is a …

In the present study, a novel titanium matrix composite with a quasi-network structure was
successfully fabricated via the hot-press sintering of the TC4 powder and Ti 2 AlC precursor …

Abstract High Cr white irons (HCWIs) are often used as high-temperature components
exposed to the temperatures exceeding 500° C. Improving oxidation resistance of HCWI …

In situ ultrafine TiC dispersion reinforced Inconel 718 alloy with enhanced mechanical
properties was fabricated by the technique of reactive hot-press sintering Ti 2 AlC and In718 …

In the present study, a novel type of Ni-based composites was successfully fabricated from
pure Ni and Ti 2 AlC powder mixtures by hot-press sintering route at 1400° C and 30 MPa …

In this work, 2024Al matrix composite reinforced by in-situ Al 3 Ti and TiC was fabricated
using hot-press sintering Ti 3 AlC 2 and 2024Al powders. The effect of Ti 3 AlC 2 precursor …