By potentiostatic polarisation for different time, passive films were formed on AISI 316SS.
Characteristics of these films were studied using electrochemical measurement and surface …

The comprehensive effects of high temperatures and corrosive environments tend to cause
grievous damage to the workpieces. In this paper, the effect of high temperature on the …

The nano/ultrafine grain (NUG) with an average grain size of 230nm was obtained by cold
rolling down to 94% reduction in thickness and reversion annealing at 800° C for 200s. The …

Passivity of austenitic stainless steel containing nitrogen (ASS N25) was investigated in
comparison with AISI 316L in deareated acid solution, pH 0.4. A peculiar nature of the …

Two kinds of FeCrMoCB amorphous coatings were prepared from different specific surface
area feedstock. The microstructures of the coatings were characterized utilizing XRD, SEM …

Plasma electrolytic oxidation of copper is first investigated in an aluminate-based electrolyte
using trisodium phosphate (TP), sodium dihydrogen phosphate (DP) and sodium …

The semiconductor properties and protective role of a single-component Cu 2 O layer were
studied using cyclic voltammetry, Mott–Schottky (MS) tests, electrochemical impedance …

The effect of sulfate on the passivity of oxygen free phosphorus (OFP) copper in simulated,
anaerobic geological saline solutions was investigated by DC polarization and …

A hash service environment containing H 2 S and CO 2 in oil industry usually causes
corrosion of carbon steel. In this study, the chromized coatings with different deposited time …

The thickness, barrier (protecting) and semiconducting properties of the potentiostatically
formed oxide films on the pure iron electrode in an aqueous borate buffer solution were …