The nanofluids (NFs) are known as a colloidal suspension where nanoparticles (NPs) are
dispersed in conventional base fluids (BFs). This suspension has been frequently used to …

This study experimentally investigates the performance of a compact gasketed plate heat
exchanger (PHE) employing Al 2 O 3 nanofluids prepared for several low concentrations of …

In the present study a comprehensive review on rheological characteristics of nanofluids for
their advanced heat transfer applications has been conducted and presented. The present …

Nanofluid in a mini/microchannel heat sink is an effective technique that combines
advantages of micro/minichannels and nanofluids to obtain high single-phase enhancement …

The convective heat transfer and flow behavior of graphene-water nanofluids are studied
experimentally by focusing on transitional flow. Graphene-water nanofluids with different …

The internal flow in corrugated tubes of different helical pitch, covering from the laminar to
turbulent regime, was studied in order to characterize the three-dimensional flow and the …

Nanofluids present enhanced thermal conductivity compared to their base fluid and then
have become good candidates for heat transfer fluids. In this study, the convective heat …

The operating conditions of the pre-heater zone of an automotive vehicle waste heat recover
heat exchanger occurs in, or close to, the transitional flow regime. For such an application …

This study reports the thermal performance of Al2O3 and TiO2 nanofluids (NFs) flowing
inside a compact plate heat exchanger (CPHE) by comparing the experimental and …

Due to their enhanced thermophysical properties, nanofluids are considered a promising
cooling solution in many applications including energy systems and electronics. The …