A contactless coupler system was developed for the analysis of reinforced concrete beams,
specifically for beams with non-contact joints. Beam tests were conducted on specimens …

The quest for innovative design of reinforced-concrete to make it more durable, flexible, and
sustainable has brought a transition from traditional methods of lap splicing to the use of …

Conventional headed rebar is advantageous in reducing embedment depth and simplifying
construction; however, they are subject to concentrated stresses at the anchor point which …

A pull-out test is performed on 30 concrete specimens to determine the effect of bond stress
on the local bearing capacity. The parameters include the dimensions of the headed bars …

In order to obtain the calculation model for the local bearing capacity of concrete Fl under
two headed bars, six pull-out concrete specimens were prepared. The effect of the net …

This article presents a parametric numerical study of the pullout behavior of headed bars
embedded in concrete elements. The finite element model was developed using Abaqus …

The use of headed reinforcement and hooked bars to reduce development length is
restricted to bars loaded in tension only and shall not be considered effective in developing …

Recently, the use of headed bars as mechanical anchorage in reinforced concrete beam-
column joints has increased rapidly. This type of anchorage is used for T-shaped beam and …

As barras com cabeça são uma alternativa promissora para ancoragem de elementos
estruturais de concreto armado, em substituição a ganchos, curvas, e barras retas, que, em …

The objective of this chapter is to study the effectiveness of Helical end rebar (H-end rebar)
in normal strength concrete. To avoid the bond failure between plain reinforcing bar and …