Shear localization in metallic materials at high strain rates
Three factors govern adiabatic shear localization: strain hardening (or softening), strain-rate
hardening, and thermal softening. It is typically associated with large shear strains (> 1), high …
hardening, and thermal softening. It is typically associated with large shear strains (> 1), high …
A review on high‐strength titanium alloys: microstructure, strengthening, and properties
LM Kang, C Yang - Advanced Engineering Materials, 2019 - Wiley Online Library
The authors review the recent advances in the development of high‐strength titanium alloys.
First, they summarize conventional strengthening approaches and their mechanisms …
First, they summarize conventional strengthening approaches and their mechanisms …
Tribology of Ti6Al4V: A review
The deleterious innate attribute of Ti6Al4V, the workhorse material among the alloy series of
titanium is its incompetent tribo-behavior. Infinite surface modification techniques, viz., the …
titanium is its incompetent tribo-behavior. Infinite surface modification techniques, viz., the …
Machining titanium and its alloys
X Yang, C Richard Liu - Machining science and technology, 1999 - Taylor & Francis
Titanium and its alloys are attractive materials due to their unique high strength-weight ratio
that is maintained at elevated temperatures and their exceptional corrosion resistance. The …
that is maintained at elevated temperatures and their exceptional corrosion resistance. The …
Mechanical drilling processes for titanium alloys: a literature review
Titanium and its alloys (Ti) are attractive for many applications due to their superior
properties. However, they are regarded as hard-to-machine materials. Drilling is an …
properties. However, they are regarded as hard-to-machine materials. Drilling is an …
Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling
MX Xie, LJ Zhang, GF Zhang, JX Zhang, ZY Bi, PC Li - Materials & Design, 2015 - Elsevier
Abstract CP-Ti/X65-pipe-steel bimetallic sheet was fabricated by explosive welding and hot
rolling (W&R). Trace of the wavy CP-Ti/X65 interface formed from explosive welding was …
rolling (W&R). Trace of the wavy CP-Ti/X65 interface formed from explosive welding was …
Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti–12 wt% Mo alloy
Dynamic recrystallization (DRX) within adiabatic shear bands forming during the fracture of
TRIP-TWIP β− metastable Ti-12Mo (wt%) alloy was recently reported. The formation of 1-3 …
TRIP-TWIP β− metastable Ti-12Mo (wt%) alloy was recently reported. The formation of 1-3 …
Shear localization: a historical overview
SM Walley - Metallurgical and materials transactions A, 2007 - Springer
This review presents a historical approach to the development of understanding of the shear
localization phenomenon in materials, concentrating particularly on impact. Deformation …
localization phenomenon in materials, concentrating particularly on impact. Deformation …
Understanding of adiabatic shear band evolution during high-strain-rate deformation in high-strength armor steel
The microstructural evolution and formation mechanism of adiabatic shear band (ASB) in a
high-strength armor steel were investigated using a laboratory-scale split Hopkinson …
high-strength armor steel were investigated using a laboratory-scale split Hopkinson …
Microstructure modification of additive manufactured Ti-6Al-4V plates for improved ballistic performance properties
Titanium alloys such as Ti-6Al-4V offer a potential lightweight alternative to traditional
armour steels for ballistic protection due to their reduced density of approximately 60% that …
armour steels for ballistic protection due to their reduced density of approximately 60% that …