Effect of Mo nanoparticles on microstructure and mechanical properties of Cu alloys by self-propagating and spark plasma sintering
JY Sun, LC Zhang, R Liu, ZM Xie, JF Yang… - Materials Science and …, 2024 - Elsevier
Cu alloys strengthened with Mo nanoparticle, with Mo contents of 2 at.%, 4 at.%, 6 at.%, 8
at.%, and 10 at.%, were fabricated by self-propagating high-temperature synthesis, followed …
at.%, and 10 at.%, were fabricated by self-propagating high-temperature synthesis, followed …
Fabrication and characterization of nanostructured immiscible Cu–Ta alloys processed by high-pressure torsion
Abstract Nanostructured Cu–Ta alloys show great potential as high strength nanocrystalline
materials due to their excellent mechanical properties and limited grain growth at high …
materials due to their excellent mechanical properties and limited grain growth at high …
Microstructure evolution and properties of a Cu-5 wt% Mo alloy with high conductivity and high anti-soften temperature
A Cu-5 wt% Mo alloy with high conductivity and high anti-soften temperature were fabricated
by combining mechanical alloying with spark plasma sintering (SPS). Cu-5 wt% Mo mixed …
by combining mechanical alloying with spark plasma sintering (SPS). Cu-5 wt% Mo mixed …
Fabrication of Li1+ xAlxGe2-x (PO4) 3 thin films by sputtering for solid electrolytes
Abstract Li 1+ x Al x Ge 2-x (PO 4) 3 (LAGP) thin films have been grown on sapphire
substrates by RF magnetron sputtering and post annealing. The effects of varying sputtering …
substrates by RF magnetron sputtering and post annealing. The effects of varying sputtering …
Novel Functionally Gradient Composites Al2O3-Cu-Mo Obtained via Centrifugal Slip Casting
J Zygmuntowicz, H Winkler, M Wachowski… - … Materials Transactions A, 2021 - Springer
The investigations applied the original concept of the formation of materials as hybrid
gradient composites. Two innovative technologies were used: formation by centrifugal slip …
gradient composites. Two innovative technologies were used: formation by centrifugal slip …
Superconducting joint structures for Bi-2212 wires using a powder-in-tube technique
Bi-2212/Ag superconducting wires are being considered as key conductor candidates for
the development of high-field magnets. This work focuses on the design and testing of …
the development of high-field magnets. This work focuses on the design and testing of …
New insights of solid-state alloying and amorphous-nanocrystalline cyclic phase transitions during Cr-40wt.% Mo powder milling
C Sun, X Hai, S Xi, Z Fan, P Li, W Wang - Journal of Alloys and Compounds, 2018 - Elsevier
In this paper, the solid-state alloying of Cr-40wt.% Mo powder by high-energy milling and
corresponding amorphous-nanocrystalline cyclic phase transitions were investigated. XRD …
corresponding amorphous-nanocrystalline cyclic phase transitions were investigated. XRD …
On nanostructured molybdenum–copper composites produced by high-pressure torsion
Nanostructured molybdenum–copper composites have been produced through severe
plastic deformation of liquid-metal infiltrated Cu30Mo70 and Cu50Mo50 (wt%) starting …
plastic deformation of liquid-metal infiltrated Cu30Mo70 and Cu50Mo50 (wt%) starting …
Development of sputtered nitrogen-doped Li1+ xAlxGe2-x (PO4) 3 thin films for solid state batteries
Abstract Nitrogen-doped Li 1+ x Al x Ge 2-x (PO 4) 3 (LAGP) thin films were prepared by
magnetron sputtering in a mixture of Ar+ N 2 using an LAGP powder target. The as …
magnetron sputtering in a mixture of Ar+ N 2 using an LAGP powder target. The as …
[HTML][HTML] New nanoscale artificial pinning centres for NbTi superconductors
The efficiency of new artificial pinning centres have been investigated in NbTi using the
oxide dispersion strengthening (ODS) concept more typically applied to steels and Ni …
oxide dispersion strengthening (ODS) concept more typically applied to steels and Ni …