In industries such as aerospace, petrochemistry and automobile, many parts of different
machines are under environment which shows high temperature and high pressure, and …

With WC as the reinforcing phase particles, the Fe-WC composite coatings with mass
fractions 0–60 wt% of WC were fabricated on a 15CrNiMo cone bit steel by laser cladding …

Ever-increasing significance of composite materials with high thermal conductivity, low
thermal expansion coefficient and high optical bandgap over the last decade, have proved …

Abstract In-situ NbC reinforced Fe-based coating was fabricated on the middle carbon steel
surface by laser cladding with the mixture of niobium and boron carbide powder, aiming at …

To accurately predict the three-dimensional (3D) characteristics of the coating and dynamic
solidification process during coaxial powder-fed laser cladding, an improved 3D multi …

The process parameters of laser cladding have significant effects on the quality of the laser
clad coating. Generally, optimizing one property usual lead to deterioration in some other …

In the work the in-situ synthesis of Ti 3 SiC 2 (MAX) phase and silicide reinforced Ni-based
composite self-lubricating coatings from Ti-Si-C system and NiCrBSi powders were carried …

Cobalt rich Stellite 6 cladding shows a superior result against wear, corrosion and galling.
However, the metallurgical bonding at the cladding interface, if not achieved carefully, may …

To improve the microhardness and wear resistance of Mo 2 FeB 2 coatings, composite
coatings were prepared by laser cladding using in situ synthesized NbC, WC, and TaC. The …

To enhance the tribological properties and service life of Mo 2 FeB 2/WC coatings, self-
lubricating composite coatings with addition of WS 2, MoS 2, and h-BN were fabricated …