Comparative review of different influence factors on molten salt corrosion characteristics for thermal energy storage
As high-temperature heat transfer medium and thermal energy storage material, molten salts
are widely applied in concentrating solar power (CSP) plants and molten salt reactors …
are widely applied in concentrating solar power (CSP) plants and molten salt reactors …
Sensible energy storage options for concentrating solar power plants operating above 600 C
To lower the cost of electricity produced, advanced high-efficiency power cycles operating at
temperatures above 600° C (such as the supercritical CO 2 Brayton cycle) are presently …
temperatures above 600° C (such as the supercritical CO 2 Brayton cycle) are presently …
Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies
JC Gomez-Vidal, R Tirawat - Solar energy materials and solar cells, 2016 - Elsevier
Next-generation solar power conversion systems in concentrating solar power (CSP)
applications require high-temperature advanced fluids in the range of 600–800° C. Current …
applications require high-temperature advanced fluids in the range of 600–800° C. Current …
ELECTROCHEMICAL CORROSION BEHAVIOR AND MICROSTRUCTURAL CHARACTERIZATION OF HVOF SPRAYED INCONEL718-Al2O3 COMPOSITE …
In the current experimental study, grey cast iron (CI) substrate was coated with Inconel718-
Al2O3 based composite coating with a high-velocity oxy-fuel technique. The effect of …
Al2O3 based composite coating with a high-velocity oxy-fuel technique. The effect of …
Electrochemical corrosion behavior and microstructural characterization of HVOF sprayed Inconel-718 coating on gray cast iron
In the present work, Inconel-718 (IN718) coating was developed on a gray cast iron (CI)
substrate by utilizing a high-velocity oxy-fuel spray technique. The microstructural analysis …
substrate by utilizing a high-velocity oxy-fuel spray technique. The microstructural analysis …
Surface protection of SS-316L with boron nitride based thin films using radio frequency magnetron sputtering technique
Sažetak In the present work, the radio frequency (RF) magnetron sputtering process was
used to develop boron nitride thin films on 316L stainless steel. The target material used in …
used to develop boron nitride thin films on 316L stainless steel. The target material used in …
Corrosion behavior of boronized nickel-based alloys in the molten chloride Salt
The study investigates the effects of diffusion coating by boronization on the corrosion
behavior of IN718 and C276 in molten KCl-MgCl 2-NaCl salt at 800° C. The boride layer …
behavior of IN718 and C276 in molten KCl-MgCl 2-NaCl salt at 800° C. The boride layer …
Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: Pre-oxidation treatment and isothermal corrosion tests
Advanced components in next-generation concentrating solar power (CSP) applications will
require advanced heat-transfer fluids and thermal-storage materials that work from about …
require advanced heat-transfer fluids and thermal-storage materials that work from about …
High-temperature corrosion of a nickel-based alloy in a molten chloride environment–The effect of thermal and chemical purifications
A Mortazavi, Y Zhao, M Esmaily, A Allanore… - Solar Energy Materials …, 2022 - Elsevier
There is currently an ever-increasing demand for higher process efficiencies in next
generation (Gen3) concentrating solar power (CSP). Higher process efficiencies may be …
generation (Gen3) concentrating solar power (CSP). Higher process efficiencies may be …
[HTML][HTML] A comprehensive review of the materials degradation phenomena in solid-liquid phase change materials for thermal energy storage
Abstract Phase Change Materials (PCMs) employ latent heat property for storage and
management of thermal energy in various applications. In order to ensure efficient …
management of thermal energy in various applications. In order to ensure efficient …