Milling is a high-performance method that allows an efficient machining of both flat and
complexly shaped surfaces. During the milling process, the cutting tool (cutters), its cutting …

The most important improvement in metal the cutting industry is the continuous utilization of
cutting tools and tool condition monitoring system. In the metal cutting process, the tool …

Determination of the maximum temperature and temperature distribution along the rake face
of the cutting tool is of particular importance because of its controlling influence on tool life …

The past century has witnessed significant advancements in turning process, cutting tools,
machine controls and coolant/lubricant chemistry. These developments have particularly …

The cooling applications in machining operations play a very important role and many
operations cannot be carried out efficiently without cooling. Application of a coolant in a …

Machining of titanium alloys such as Ti-6Al-4 V can be very intimidating due to their low
thermal conductivity leading to elevated cutting temperatures at the chip-tool interface (I CT) …

This paper presents a comprehensive study on the complex drill-exit temperature
characteristics in the drilling of unidirectional (UD) and multidirectional (MD) CFRPs using a …

In hard turning, the chip removal process is very difficult. One of the preferred auxiliary
methods to reduce cost and improve quality is the use of cutting fluid. However, the use of …

In this study, a comparison of measured cutting parameters is discussed while machining
AISI 52100 low-alloy hardened steel under two different sustainable cutting environments …

During machining processes, a large amount of heat is generated due to plastic
deformation, in a very small area of the cutting tool. This high temperature strongly …