Abstract Effects of Gd addition on the strain hardening behavior and yield asymmetry of pure
Mg are investigated by subjecting extruded pure Mg, Mg–5Gd, and Mg–15Gd (all in wt%) to …

This study establishes the microstructure evolution maps of a commercial AZ31 alloy and a
recently developed Mg–9Al–0.8 Zn–0.9 Ca–0.6 Y–0.5 MM (AZXWMM91100) alloy on the …

The microstructure of an as-cast Mg-5Zn-0.3 Ca alloy was significantly modified by friction
stir processing, which improved the alloy's corrosion resistance. In electrochemical results …

The structure, hardness, tensile and wear behavior of Mg–5Sb–xSiC hybrid composites
experimented where the amount of SiC particles were 1, 3, and 5 wt% SiCp before and after …

In this work, an attempt was made to study the synergetic effects of changes in alloying
elements including Zr and Ca, as well as the hot extrusion process on the microstructure …

The effect of friction stir processing on microstructure and mechanical properties of AISI 316
stainless steel was investigated, where characterizations were performed using optical …

Developing appropriate protecting coatings for Mg alloy applications is a challenging issue.
Herein, nanohydroxyapatite (nanoHAP) powder was first fabricated by the simple …

In this study, the effects of bending deformation on the precipitation behavior of an extruded
AZ80 alloy are investigated by subjecting a plate of the alloy to three-point bending and …

It has been tried in this research for investigating the microstructure and texture of Al0.
3CoCrFeNi after the cold rolling process. At first, an ingot was made by vacuum arc melting …

Magnesium (Mg) alloys are promising biodegradable implant materials. If successful, they
do not require second surgical operation for their removal. However, the focus of this study is …