Abstract Alloy 718 is a Ni-Fe-based superalloy, which has been successfully adapted to
powder bed fusion (PBF) additive manufacturing because of the alloy's adaptability with …

Additive manufacturing (AM) is rapidly growing owing to its high design freedom, better buy-
to-fly ratios, and reduced fabrication time. The notable advantages and technological …

This paper systematically investigates the microstructure, crystal structure and related
mechanical properties of Inconel 718 thin walls prepared by two different methods, laser …

Sheet-based triply periodic minimal surface (TPMS) lattices with different unit cell types
(diamond, gyroid, fischer, IWP, and primitive) were fabricated from 316L stainless steel using …

Four innovative hybrid scanning strategies (0°+ 67°, 45°+ 67°, 67°+ 67° and 90°+ 67°) of
laser powder bed fusion (LPBF) have been proposed to tailor the microstructure and …

In this study, a new grade of Inconel 718 alloy (IN718) strengthened by nano-oxides has
been designed and produced. The alloy composition of 0.3 wt% Y 2 O 3–IN718 has been …

This study investigated the effects of hatch spacing and laser remelting on microstructure
and growth texture of IN718 superalloy fabricated via laser powder bed fusion (LPBF) based …

The phase composition, dislocation density and crystallographic texture associated with the
mechanical properties of Ti–15Mo alloys fabricated by selective laser melting (SLM) with …

The present study focuses on understanding the effect of scan strategy on the microstructure
and mechanical properties of LDED fabricated IN718 built at optimized process conditions …

Haynes 230 alloy is widely used in aero-engines with high strength, fatigue resistance,
oxidation resistance and other properties. However, the powder metallurgy process limits its …