[HTML][HTML] Evaluation of the shear and permanent deformation properties of cold in-place recycled mixtures with bitumen emulsion using triaxial tests

P Orosa, I Pérez, AR Pasandín - Construction and Building Materials, 2022 - Elsevier
The cold in-place recycling (CIR) technique is a road rehabilitation method suitable for a
circular economy. Triaxial tests have proven to be suitable for studying the mechanical …

Moisture migration characterization of bitumen emulsion-based cold in-place recycling mixture over curing

J Jiang, Z Zhao, X Jiang, Z Leng, B Yang, F Ni - Materials and Structures, 2023 - Springer
Abstract Bitumen Emulsion-based Cold In-place Recycling (BE-CIR) pavement has been
widely used all around the world due to its superior environmental benefits. BE-CIR …

Complex modulus of cement-bitumen treated materials produced with different reclaimed asphalt gradations

C Mignini, F Cardone, A Graziani - Materials and Structures, 2022 - Springer
The increasing attention over cold recycling technologies as sustainable paving solutions
requires a proper characterisation in terms of complex modulus for supporting the pavement …

[HTML][HTML] Compactability and mechanical properties of cold recycled mixes prepared with different nominal maximum sizes of RAP

P Orosa, G Orozco, JC Carret, A Carter, I Pérez… - … and Building Materials, 2022 - Elsevier
The use of cold recycled asphalt mixtures (CRM) has been soaring during recent years.
Reclaimed Asphalt Pavement (RAP) is the main component of CRM, and despite the …

[HTML][HTML] Numerical simulation of the stiffness evolution with curing of pavement sections rehabilitated using cold in-place recycling technology

P Orosa, L Medina, J Fernández-Ruiz, I Pérez… - … and Building Materials, 2022 - Elsevier
Cold in-place recycling (CIR) technologies are becoming one of the main bets in the road
sector to promote the reduction of greenhouse gas emissions. This technique also …

[HTML][HTML] Evaluation of water loss and stiffness increase in cold recycled mixes during curing

P Orosa, I Pérez, AR Pasandín - Case Studies in Construction Materials, 2023 - Elsevier
Implementing cold solutions is one of the primary efforts in the road sector to counteract CO
2 emissions and climate change. Using cold recycled mixtures (CRM) permits the reuse of …

Evolutive properties of emulsified asphalt cold recycled mixtures at early stage

H Du, R Li, H Zhu, P Qi, L Lei, S Yang, Q Tan… - … and Building Materials, 2024 - Elsevier
The global upgrading of road pavements has led to issues related to recycled asphalt
pavements (RAP). Recycling as emulsified asphalt cold recycled mixture (ECRM) is an …

Micropore structure characterization of the bitumen emulsion-based cold in-place recycling mixture considering water gradient migration condition through multiple …

Z Zhao, J Jiang, Z Leng, F Ni - Construction and Building Materials, 2023 - Elsevier
Abstract Bitumen Emulsion-based Cold In-place Recycling (BE-CIR) has been widely used
all around the world due to its superior environmental benefits. Unlike the hot mix asphalt …

[HTML][HTML] A stress–temperature superposition approach to study the nonlinear resilient behavior of cold recycled mixtures (CRM) with active filler addition

P Orosa, I Pérez, AR Pasandín, JE Haddock - Construction and Building …, 2023 - Elsevier
The asphalt paving sector is currently embracing and enhancing cold mixture technologies
to reduce carbon emissions and decarbonize its operations. Cold recycled mixtures (CRM) …

Characterization of Cold Recycled Asphalt Mixtures including Reinforcing Fibers

C Carpani, E Bocci, M Bocci - Sustainability, 2023 - mdpi.com
In recent years, cold recycling techniques have been widely used all over the world thanks
to their huge environmental advantages. However, their performances are lower than the …