HF pulsating carrier voltage injection method based on improved position error signal extraction strategy for PMSM position sensorless control

Z Mai, F Xiao, K Fu, J Liu, C Lian, K Li… - IEEE Transactions on …, 2021 - ieeexplore.ieee.org
High-frequency (HF) pulsating carrier voltage injection method is widely used in position
sensorless control of permanent magnet synchronous motor. In this method, the position …

FPGA design of a variable step-size variable tap length denlms filter with hybrid systolic-folding structure and compressor-based booth multiplier for noise reduction in …

MM Ganatra, CH Vithalani - Circuits, Systems, and Signal Processing, 2022 - Springer
Electrocardiogram (ECG) is a critical type of biological signal that brings significant data
about the patients. The morphological structure of ECG signals is usually distorted by the …

An Improved Current Signal Extraction-Based High-Frequency Pulsating Square-Wave Voltage Injection Method for Interior Permanent-Magnet Synchronous Motor …

D Meng, Q Wu, J Zhang, L Diao - Electronics, 2024 - mdpi.com
The high-frequency (HF) voltage injection method is widely applied in achieving position-
sensorless control for interior permanent-magnet synchronous motors (IPMSMs). This …

RCVM‐ASS‐CICSKA‐PAPT‐VDF: VLSI design of high‐speed reconfigurable compressed Vedic PAPT‐VDF filter for ECG medical application

KV Suresh Kumar, D Madhavi - Transactions on Emerging …, 2024 - Wiley Online Library
During signal acquisition, the signals are impacted by multiple noise sources that must be
filtered before any analysis. However, many different filter implementations in VLSI are …

Short transient IIR multinotch filter with time-varying parameters and nonzero initial conditions

S Kocoń, J Piskorowski - IEEE Transactions on Instrumentation …, 2020 - ieeexplore.ieee.org
In this article, an analytical concept and hardware verification of the time-varying infinite
impulse response narrow multiband-stop filter with nonzero initial conditions are presented …