Effect of Nb, Zr and Zr+ Hf on the microstructure and mechanical properties of β-solidifying γ-TiAl alloys

VM Imayev, AA Ganeev, DM Trofimov… - Materials Science and …, 2021 - Elsevier
The present work has been devoted to study of β-solidifying γ-TiAl alloys based on Ti–44Al-
0.2 B and doped with Nb, Zr and Zr+ Hf. The phase transformation sequences were …

Influence of nano-Y2O3 addition on microstructure and tensile properties of high-Al TiAl alloys

Y Guo, Y Chen, S Xiao, J Tian, Z Zheng, L Xu - Materials Science and …, 2020 - Elsevier
The effect of nano-Y 2 O 3 addition on microstructure and tensile properties of high-Al TiAl
alloys prepared by induction skull melting is investigated. The result shows that the addition …

Temperature dependent anisotropic mechanical behavior of TiAl based alloys

B Selvarajou, MH Jhon, RV Ramanujan… - International Journal of …, 2022 - Elsevier
Abstract γ-based titanium aluminides exhibit remarkable mechanical properties at high
temperatures and are deployed in jet engines. The microstructure of these alloys, consisting …

Research on aluminum component change and phase transformation of TiAl-based alloy in electron beam selective melting process under multiple scan

J Zhou, H Li, Y Yu, Y Li, Y Qian, K Firouzian, F Lin - Intermetallics, 2019 - Elsevier
With the developments and applications of additive manufacturing technologies, additive
manufacturing of hard-workable TiAl-based alloys has been widely studied. Electron beam …

Investigation of deformation mechanisms in an advanced FeCrAl alloy using in-situ SEM-EBSD testing

N Bibhanshu, MN Gussev, CP Massey… - Materials Science and …, 2022 - Elsevier
The deformation mechanisms associated with uniaxial tensile testing are studied by
conducting tensile experiments of an FeCrAl alloy using scanning electron microscopy …

Elevated temperature performance and creep behavior of Y2O3 reinforced Ti-48Al-6Nb alloy at the brittle-ductile transition temperature

Y Guo, J Tian, S Xiao, L Xu, Y Chen - Journal of Alloys and Compounds, 2021 - Elsevier
This study investigated the elevated temperature properties and creep behavior of Y 2 O 3-
bearing Ti-48Al-6Nb alloy. Tensile and creep tests of Ti-48Al-6Nb and Ti-48Al-6Nb-0.05 Y 2 …

High temperature tensile properties and fracture behavior of Y2O3-bearing Ti-48Al-2Cr-2Nb alloy

Y Guo, S Xiao, Y Chen, J Tian, Z Zheng, L Xu - Intermetallics, 2020 - Elsevier
In present work, the effect of Y 2 O 3 on tensile properties and fracture behavior of Ti-48Al-
2Cr-2Nb alloy at elevated temperature was investigated. The alloys were successively …

The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides

J Bresler, S Neumeier, M Ziener, F Pyczak… - Materials Science and …, 2019 - Elsevier
Titanium aluminides are excellent materials for light-weight applications at high
temperatures. To enhance their creep strength, various alloying elements are added. In this …

Effects of niobium on phase composition and improving mechanical properties in TiAl alloy reinforced by Ti2AlC

H Fang, R Chen, Y Liu, Y Tan, Y Su, H Ding, J Guo - Intermetallics, 2019 - Elsevier
The effect of niobium on microstructure and mechanical properties of Ti46Al2. 6C xNb (at.%)
alloys with Nb content ranging from 0 to 8 at.% have been studied. The alloys have been …

Slip transfer across γ-TiAl lamellae in tension

AJ Palomares-García, MT Pérez-Prado… - Materials & Design, 2018 - Elsevier
This work identifies the mechanisms governing dislocation transmission across lamellar
interfaces in a Ti-45Al-2Nb-2Mn (at.%)+ 0.8 (vol%) TiB 2 (Ti4522XD) alloy. With this aim, a …