The pH dependent surface charging and points of zero charge. VII. Update
M Kosmulski - Advances in Colloid and Interface Science, 2018 - Elsevier
The pristine points of zero charge (PZC) and isoelectric points (IEP) of metal oxides and IEP
of other materials from the recent literature, and a few older results (overlooked in previous …
of other materials from the recent literature, and a few older results (overlooked in previous …
Recent progress in the pore size control of silicon carbide ceramic membranes
Y Wang, Y Liu, Z Chen, Y Liu, J Guo, W Zhang… - Ceramics …, 2022 - Elsevier
The demand for separation and purification applications under harsh conditions has grown
strongly in recent years. Silicon carbide (SiC) ceramic membranes have broad prospects in …
strongly in recent years. Silicon carbide (SiC) ceramic membranes have broad prospects in …
Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system
Y Wang, Q Liu, B Zhang, H Zhang, Y Jin, Z Zhong… - Ceramics …, 2021 - Elsevier
Almost fully-dense B 4 C–SiC–TiB 2 composites with a high combination of strength and
toughness were prepared through in situ reactive spark plasma sintering using B 4 C and …
toughness were prepared through in situ reactive spark plasma sintering using B 4 C and …
Fabricating toughened super-hard B4C composites at lower temperature by transient liquid-phase assisted spark plasma sintering with MoSi2 additives
Toughened, super-hard B 4 C triplex-particulate composites were densified by spark plasma
sintering with MoSi 2 additives (5, 10, and 15 vol.%) at temperatures in the range 1750 …
sintering with MoSi 2 additives (5, 10, and 15 vol.%) at temperatures in the range 1750 …
Investigation the effect of FeNiCoCrMo HEA addition on properties of B4C ceramic prepared by spark plasma sintering
In this study, monolithic B 4 C and B 4 C-based ceramics incorporating FeNiCoCrMo dual-
phase (FCC and BCC) high entropy alloys (HEAs) were produced by spark plasma sintering …
phase (FCC and BCC) high entropy alloys (HEAs) were produced by spark plasma sintering …
Unconventional materials processing using spark plasma sintering
Spark plasma sintering (SPS) has gained recognition in the last 20 years for its rapid
densification of hard-to-sinter conventional and advanced materials, including metals …
densification of hard-to-sinter conventional and advanced materials, including metals …
[HTML][HTML] Ultra-low temperature spark plasma sintering of super wear-resistant hard B4C composites
The feasibility was investigated of fabricating super wear-resistant hard B 4 C composites by
spark plasma sintering (SPS) at ultra-low temperature (ie, 1400° C) using very high …
spark plasma sintering (SPS) at ultra-low temperature (ie, 1400° C) using very high …
Transient liquid-phase assisted spark-plasma sintering and dry sliding wear of B4C ceramics fabricated from B4C nanopowders
With the motivation of developing B 4 C composites with superior wear resistance for
tribological applications, an ultrafine-grained (∼ 200− 300 nm) B 4 C composite was …
tribological applications, an ultrafine-grained (∼ 200− 300 nm) B 4 C composite was …
Ultra-low wear B4C-SiC-MoB2 composites fabricated at lower temperature from B4C with MoSi2 additives
Seeking to fabricate B 4 C composites that are even more superhard (> 30 GPa) at lower
cost, B 4 C was transient liquid-phase assisted spark-plasma-sintered, somewhat …
cost, B 4 C was transient liquid-phase assisted spark-plasma-sintered, somewhat …
Densification and properties of B4C-based ceramics with CrMnFeCoNi high entropy alloy as a sintering aid by spark plasma sintering
M Zhang, R Li, T Yuan, X Feng, L Li, S Xie, Q Weng - Powder Technology, 2019 - Elsevier
Equiatomic CrMnFeCoNi high entropy alloy (HEA) was firstly used as sintering aid for
preparation of B 4 C ceramics by spark plasma sintering (SPS) at temperature ranging from …
preparation of B 4 C ceramics by spark plasma sintering (SPS) at temperature ranging from …