Corrosion of metals induces enormous loss of material performance and increase of cost,
which has been a common and intractable issue that needs to be addressed urgently …

Rare earths are among the most promising options for replacing chromate conversion
coatings on aluminium. In nearly three decades of research, several hundred papers have …

The novel cerium based conversion (CeC) treatment was performed on 2A14-T3511
aluminum alloy micro-arc oxidation (MAO) coatings with thickness of 15 μm and 30 μm …

To solve corrosion problems of Al-Li alloys in marine environment, Fe-based amorphous
coating was first deposited on 8090 Al-Li alloy by high velocity oxy-fuel spraying. The …

In the present work, silane coatings based on glycidoxypropyltrimethoxysilane/
methyltrimethoxysilane (GPTMS/MTMS) and silica nanoparticles were prepared by a sol-gel …

Environmentally friendly Ce-based sealing post-treatments were developed for PEO
coatings on AM50 magnesium alloy. The influence of the Ce (NO 3) 3 concentration in the …

By alternative immersion into the aqueous solutions of phytic acid (PA) and CeCl 3 for n
cycles, a nanocomposite coating coded as (PA/Ce) n was fabricated on the magnesium …

The microstructures, mechanical properties, thermal conductivities, and corrosion behavior
of novel high-thermal-conductivity hypoeutectic Al-Si alloys, prepared by rheological high …

This encyclopedia, written by authoritative experts under the guidance of an international
panel of key researchers from academia, national laboratories, and industry, is a …

The paper aims to provide some insight into the fundamental mechanisms for the behavior
of cerium oxides nanoparticles as corrosion inhibitors for steel. The work was carried out on …