With the rapid expansion of municipal solid waste (MSW) incineration, the applicability,
technical status, and future improvement of MSW incineration attract much attention in …

Oxyfuel combustion is one of the leading technologies considered for capturing CO 2 from
power plants with CCS. This involves the process of burning the fuel with nearly pure …

Growing public awareness of the environmental impact of coal combustion has raised
serious concerns about the various hazardous trace elements produced by coal firing …

The formation and emission of sulfur trioxide (SO 3) in coal-fired power plants has received
increasing attention due to its adverse effects on the operation of plant and environment …

Uncertainties in the calorific value and composition of municipal solid waste (MSW), the
variability in operations, equipment performance decline, maintenance needs, and other …

Co-firing coal and biomass under pressurized oxy-fuel combustion (POFC) mode in fluidized
beds is a novel and promising technology to capture CO 2 at a low cost and with eco-friendly …

The oxy-fuel process is one of three carbon capture technologies which supply CO2 ready
for sequestration–the others being post-combustion capture and IGCC with carbon capture …

Oxy-coal combustion is one of the leading technologies for carbon capture and storage. This
paper presents a review of the opportunities and challenges surrounding the development …

Acid dew-point (ADP) is the temperature at which the acid vapor, normally means sulfuric
acid (H 2 SO 4), in flue gas begins to condense. Acid condensation can result in low …

Raw natural gas and crude oil contain a variety of sulfurous species such as H 2 S, COS, CS
2, mercaptans, and organosulfur complexes that lead to the formation of SO 2 and other …