Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes
In this study, the effect and characteristics of the laser clad interstitial CoCrFeNi high entropy
alloy coating reinforced with carbon nanotubes (CNTs) was investigated. 1.0 wt% of CNTs …
alloy coating reinforced with carbon nanotubes (CNTs) was investigated. 1.0 wt% of CNTs …
The effect of temperature on the evolution of eutectic carbides and M7C3→ M23C6 carbides reaction in the rapidly solidified Fe-Cr-C alloy
This paper presents the effect of high temperature heat treatment on the evolution of eutectic
carbides and on the M 7 C 3→ M 23 C 6 carbides reaction in the rapidly solidified …
carbides and on the M 7 C 3→ M 23 C 6 carbides reaction in the rapidly solidified …
[HTML][HTML] Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non-equilibrium crystallization
The aim of this study was to characterize the eutectic carbides formed in an as-cast
hypoeutectic Fe–25Cr–5Mo–0.82 C alloy and also to determine their formation sequence …
hypoeutectic Fe–25Cr–5Mo–0.82 C alloy and also to determine their formation sequence …
Investigation of M7C3, M23C6 and M3C carbides synthesized on austenitic stainless steel and carbon fibers using laser metal deposition
AI Gorunov - Surface and Coatings Technology, 2020 - Elsevier
This study investigates the mechanism driving the formation of core-shell carbides during
laser metal deposition (LMD). The interaction between CFs and 316L metal powder under …
laser metal deposition (LMD). The interaction between CFs and 316L metal powder under …
Experimental investigation and numerical simulation of synthesis carbides in Inconel 718/CFs/316L composite obtained by direct energy deposition
A Gorunov - Progress in Additive Manufacturing, 2024 - Springer
Direct energy deposition was used to obtain the carbides M x C y in carbon-fibers-reinforced
Fe–Ni matrix composites. The direct energy deposition method has been proposed to …
Fe–Ni matrix composites. The direct energy deposition method has been proposed to …
Magnetic detection of chromium depleted regions in metastable Fe-Cr-C alloy
In this work, vibrating sample magnetometry was used to analyse and correlate the
magnetisation versus temperature behaviour in the metastable, hypoeutectic Fe-Cr-C alloy …
magnetisation versus temperature behaviour in the metastable, hypoeutectic Fe-Cr-C alloy …
Hypoeutectic Fe-Cr-Ni-Mo-C alloys additionally strengthened by the Frank-Kasper phases–Design by means of the CALPHAD approach
K Wieczerzak, P Bała - Calphad, 2019 - Elsevier
In the present work, the concept of hypoeutectic Fe-Cr-Ni-Mo-C alloys additionally
strengthened by the Frank-Kasper phases is shown. The alloys were designed using the …
strengthened by the Frank-Kasper phases is shown. The alloys were designed using the …
316L Stainless-Steel Carburizing Close to Eutectic Transformation Using the Spark Plasma Sintering Process
Y Pinot, A Besnard, MR Ardigo-Besnard… - Journal of Materials …, 2024 - Springer
This work focuses on the 316L austenitic stainless-steel case-hardening microstructure, after
the SPS process near the solid/liquid state transition temperature. This process, faster than …
the SPS process near the solid/liquid state transition temperature. This process, faster than …
[PDF][PDF] Microstructure Development of Low Carbon Steel Surface Hard-Faced by Chromium Carbide Alloy
P Batkhuu, O Ganbaatar, U Lhkagvasuren… - 2024 - easychair.org
In this investigation, the microstructure changes of-faced by chromium carbi containing alloy
was studied using XRD and SEM analys study. First group of samples was pure low carbon …
was studied using XRD and SEM analys study. First group of samples was pure low carbon …
Improved Wear Resistance of the Fe-C-Ti Hardfacing Alloy by Nano TiCN Particles Fabricated by FCAW-N2
M Mohammadikhah - Journal of Environmental Friendly Materials, 2018 - jefm.karaj.iau.ir
In this investigation the Fe-C-Ti hardfacing alloy was fabricated by FCAW-N2 on AISI 1010
mild steel substrates, and then heat treatment was carried out on the samples. The OES …
mild steel substrates, and then heat treatment was carried out on the samples. The OES …