Flow stress behavior, constitutive modeling, and microstructural characteristics of DP 590 steel at elevated temperatures
In the present study, the flow stress behavior and material properties of dual-phase (DP) 590
steel have been investigated for different process parameters such as temperature (room …
steel have been investigated for different process parameters such as temperature (room …
Study on activation energy and strain rate sensitivity of closed-cell aluminium hybrid composite foam
BN Yadav, D Muchhala, S Sriram, DP Mondal - Journal of Alloys and …, 2020 - Elsevier
High-temperature deformation behavior of LM13 aluminium alloy foam and LM13-silicon
carbide (SiC)-multiwall carbon nanotube (MWCNTs) hybrid composite foams (HCFs) was …
carbide (SiC)-multiwall carbon nanotube (MWCNTs) hybrid composite foams (HCFs) was …
On the increase of intrinsic workability and hot working temperature range of M42 ledeburitic super high steel in as-cast and wrought states
D Bombač, M Terčelj, M Fazarinc, G Kugler - Materials Science and …, 2017 - Elsevier
In order to remain competitive to powder metallurgy and spray forming, further improvements
of a classical production route are needed and desired. This paper describes the means by …
of a classical production route are needed and desired. This paper describes the means by …
Microstructural characterization during the hot deformation of 1.17 C–11.3 Cr–1.48 V–2.24 W–1.35 Mo ledeburitic tool steel
TV Pirtovšek, G Kugler, M Godec, M Terčelj - Materials characterization, 2011 - Elsevier
The hot-deformation behavior of 1.17 C–11.3 Cr–1.48 V–2.24 W–1.35 Mo tool steel was
studied. Hot-compression tests were carried out in the temperature range of 850–1200° C, at …
studied. Hot-compression tests were carried out in the temperature range of 850–1200° C, at …
Amelioration of surface cracking during hot rolling of AISI D2 tool steel
Reported is a relationship between a profile edge cracking during hot rolling of AISI D2 tool
steel and material and processing parameters. Several months of observation of industrial …
steel and material and processing parameters. Several months of observation of industrial …
Response to hot deformation conditions and microstructure development of Nimonic 80A superalloy
Laboratory compression tests at different temperatures and strain rates have been
performed on Nimonic 80A superalloy to define optimal hot forming characteristics. A …
performed on Nimonic 80A superalloy to define optimal hot forming characteristics. A …
[PDF][PDF] Physically based constitutive description of OFHC copper at hot working conditions
H Mirzadeh - Kovove Mater., 2015 - kovmat.sav.sk
The hot deformation behavior of oxygen-free high-conductivity (OFHC) copper was studied
through constitutive analysis by two distinct approaches, which consider the material …
through constitutive analysis by two distinct approaches, which consider the material …
[PDF][PDF] Microstructure development of Nimonic 80A superalloy during hot deformation Razvoj mikrostrukture superzlitine Nimonic 80 A med vročo deformacijo
Uniaxial cylindrical compression tests at various temperatures and strain rates have been
performed on the Nimonic 80A superalloy samples in order to define the best hot working …
performed on the Nimonic 80A superalloy samples in order to define the best hot working …
In-Depth Comparison of an Industrially Extruded Powder and Ingot Al Alloys
An industrial press was used to consolidate compacted aluminum powder with a nominal
diameter in the range of 1 µm. Direct and indirect hot-extrusion processes were used, and …
diameter in the range of 1 µm. Direct and indirect hot-extrusion processes were used, and …
Effect of dislocation mechanisms during extrusion of nanostructured aluminum powder alloy
AM Jorge Jr, MM Peres, CS Kiminami… - … Materials Transactions A, 2009 - Springer
Abstract Nanostructured Al-3.0 Fe-0.42 Cu-0.37 Mn powder alloy was deformed by extrusion
over a temperature range of 375° C to 425° C, a ram speed range of 1 to 30 mm/s, and an …
over a temperature range of 375° C to 425° C, a ram speed range of 1 to 30 mm/s, and an …