Rational design of nanomaterials for high energy density dielectric capacitors via electrospinning

J Hu, S Zhang, B Tang - Energy Storage Materials, 2021 - Elsevier
The increasing energy consumption and environmental degradation have led governments
to pay attention to conversion, storage and management of renewable and clean energy …

Synthesis of calcium copper titanate (CaCu3Ti4O12) nanowires with insulating SiO2 barrier for low loss high dielectric constant nanocomposites

H Tang, Z Zhou, CC Bowland, HA Sodano - Nano Energy, 2015 - Elsevier
The discovery of a giant dielectric constant of> 10 5 in calcium copper titanate (CCTO) has
generated significant interest for application in electronic devices. Over the past decade …

Fast discharge and high energy density of nanocomposite capacitors using Ba0. 6Sr0. 4TiO3 nanofibers

ZB Pan, LM Yao, JW Zhai, SH Liu, K Yang… - Ceramics …, 2016 - Elsevier
Nanocomposites combining high breakdown strength (BDS) polymer and high dielectric
permittivity ceramic fillers have shown great potential for pulsed power application. Here a …

Increasing the Energy Efficiency and Breakdown Strength of High-Energy-Density Polymer Nanocomposites by Engineering the Ba0.7Sr0.3TiO3 Nanowire Surface …

S Wang, X Huang, G Wang, Y Wang… - The Journal of …, 2015 - ACS Publications
Flexible nanocomposites comprising a dielectric polymer matrix and high-k nanoparticle
fillers have shown great potential for power energy storage applications. However, the …

Scalable synthesis of morphotropic phase boundary lead zirconium titanate nanowires for energy harvesting.

Z Zhou, H Tang, HA Sodano - Advanced Materials (Deerfield Beach …, 2014 - europepmc.org
Lead zirconium titanate (PZT) nanowires are synthesized using a scalable two-step
hydrothermal reaction. The piezo-electric coupling coefficient of the PZT NWs shows the …

Boosting Efficiency in Piezo-Photocatalysis Process Using Poled Ba0.7Sr0.3TiO3 Nanorod Arrays for Pollutant Degradation and Hydrogen Production

W Wang, M Zhang, X Li, S Zhang, F Yu… - … Applied Materials & …, 2024 - ACS Publications
Recently, the combination of the piezoelectric effect in the photocatalytic process, referred to
as piezo-photocatalysis, has gained considerable attention as a promising approach for …

[HTML][HTML] Structural and dielectric properties of Bi-doped barium strontium titanate nanopowders synthesized by sol–gel method

AS Attar, ES Sichani, S Sharafi - Journal of materials research and …, 2017 - Elsevier
Nano-crystalline barium strontium titanate, Ba 0.5 Sr 0.5 TiO 3,(BST) powders were
synthesized by sol–gel method, and the effects of Bi-doped on the microstructure and …

[HTML][HTML] Ternary PVDF-based terpolymer nanocomposites with enhanced energy density and high power density

F Liu, Q Li, Z Li, L Dong, C Xiong, Q Wang - Composites Part A: Applied …, 2018 - Elsevier
The development of advanced dielectric materials with high electric energy densities is of
crucial importance in modern electronics and electric power systems. Herein, a kind of …

Controlled synthesis of ultra-long vertically aligned BaTiO3 nanowire arrays for sensing and energy harvesting applications

A Koka, Z Zhou, H Tang, HA Sodano - Nanotechnology, 2014 - iopscience.iop.org
A novel approach for the synthesis of ultra-long (up to∼ 45 μm) vertically aligned barium
titanate (BaTiO 3) nanowire (NW) arrays on an oxidized Ti substrate is developed. The …

In situ doping of BaTiO3 and visualization of pressure solution in flux‐assisted cold sintering

T Sada, Z Fan, A Ndayishimiye, K Tsuji… - Journal of the …, 2021 - Wiley Online Library
Cold sintering process (CSP) has attracted great interest due to its extremely low processing
temperatures, fast processing times, and simplicity to allow for the densification of ceramics …