In this work, hexagonal boron nitride (h-BN)-embedded 316L stainless steel (SS316L/h-BN)
composites were prepared using a conventional powder metallurgy process. In order to …

The present review focuses on the recent development of steel matrix composites and their
advancement. Stainless steel has broad application but its critical drawbacks, such as poor …

This work studies the tribological behavior of the 316L austenitic stainless steels alloyed
with boron produced by conventional powder metallurgy process. Boron effect was …

The porosity of sintered stainless steels modifies their oxidation behavior, as compared to
that of wrought stainless steels. This work studies the oxidation behavior of three sintered …

This paper studies the change in properties of powder metallurgy 316L stainless steel,
depending on kind of added reinforcement and its amount and the sintering atmosphere …

A study was made of the change in properties of 316L stainless steel depending on the type
and the amount of added reinforcement. The reinforcements used were Cr2Al, Cr2Ti, VC …

The present study examines the cyclic oxidation behaviour at 900° C in air of sintered 316L
austenitic stainless steels containing 1 wt.% yttria or 0.6 wt.% boron. The microstructures of …

Metal matrix composites were manufactured using 316L austenitic stainless steel as matrix
and TiAl intermetallic as reinforcement. Three levels of reinforcement were used: 3, 6 and …

The effect of different boron concentrations on the sintering behavior of an Fe-1.5 pct Mo (wt
pct) prealloyed powder was investigated. Sintering was carried out in a dilatometer so that …

Metal matrix composites (MMCs), based on M3/2 high-speed steel (HSS) and reinforced
with two different percentages of TiCN (2.5% and 5% by wt), were manufactured following a …