[HTML][HTML] A comprehensive review of machinability of difficult-to-machine alloys with advanced lubricating and cooling techniques
Superalloys find widespread application in demanding environments owing to their robust
strength and high resistance to heat and corrosion. Nonetheless, these very attributes …
strength and high resistance to heat and corrosion. Nonetheless, these very attributes …
Microstructural characterization and electrochemical corrosion behaviour of HVOF sprayed Alloy718-nanoAl2O3 composite coatings
In the present research work, microstructural evolution and corrosion behaviour of the high-
velocity oxy-fuel (HVOF) sprayed Alloy718-nano Al 2 O 3 composite coatings were …
velocity oxy-fuel (HVOF) sprayed Alloy718-nano Al 2 O 3 composite coatings were …
Influence of heat treatment on the microstructure and corrosion properties of the Inconel-625 clad deposited by microwave heating
The present work explores the viability of using the microwave heating technique to apply
Inconel-625 cladding to a stainless steel (SS-316) substrate. As-deposited clad specimens …
Inconel-625 cladding to a stainless steel (SS-316) substrate. As-deposited clad specimens …
Microstructure and wear properties of Al2O3-CeO2/Ni-base alloy composite coatings on aluminum alloys by plasma spray
L He, Y Tan, X Wang, T Xu, X Hong - Applied Surface Science, 2014 - Elsevier
Al 2 O 3 and CeO 2 particles reinforced Ni-base alloy composite coatings were prepared on
aluminum alloy 7005 by plasma spray. The microstructure, microhardness, fracture …
aluminum alloy 7005 by plasma spray. The microstructure, microhardness, fracture …
Wear and high temperature oxidation behaviour of wire arc sprayed iron based coatings
R Li, DY He, Z Zhou, ZJ Wang… - Surface …, 2014 - journals.sagepub.com
In the present work, FeCrB (CSi) cored wires (C17, C21 and C25) were designed and
deposited as coatings by wire arc spraying. The microstructure, microhardness, wear and …
deposited as coatings by wire arc spraying. The microstructure, microhardness, wear and …
Development and Characterization of High-Velocity Flame Sprayed Ni/TiO2/Al2O3 Coatings on Hydro Turbine Steel
Nickel-based coatings deposited by high-velocity flame spray (HVFS) process have been
widely used to overcome the slurry erosion in a hydro turbine, where many turbine …
widely used to overcome the slurry erosion in a hydro turbine, where many turbine …
Processing strategy for high strength Ni-based hybrid composite clad on SS 316L steel through microwave heating
Processing of nickel-based high strength composites and alloys is a difficult and thought-
provoking task. In this work, a strategy of heating through microwaves radiation is utilized to …
provoking task. In this work, a strategy of heating through microwaves radiation is utilized to …
Comparative high-temperature corrosion behavior of Ni-20Cr coatings on T22 boiler steel produced by HVOF, D-Gun, and cold spraying
To protect materials from surface degradations such as wear, corrosion, and thermal flux, a
wide variety of materials can be deposited on the materials by several spraying processes …
wide variety of materials can be deposited on the materials by several spraying processes …
Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys
NICRALC is a family of intermetallic compound-based casting alloys proposed as an
economic alternative for abrasion and erosion-resistant cobalt alloys, mainly under more …
economic alternative for abrasion and erosion-resistant cobalt alloys, mainly under more …
Anticorrosion of thermal sprayed Al–Zn–Si coating in simulated marine environments
HQ Yang, ZJ Yao, DB Wei, WB Zhou… - Surface …, 2014 - journals.sagepub.com
The Al–Zn–Si coating was deposited on Q235 steel by thermal spray technology. The
corrosion behaviour of the coating in simulated marine environments has been investigated …
corrosion behaviour of the coating in simulated marine environments has been investigated …